Power One-35 - SMITH MACHINERY COMPANY, INC buys and sells Murata Wiedemann, turret presses and punches, press brakes, CNC lasers, shears, lathes and more!
Ebay
Language Translator

Power One-35

Swing Over Bed 34.6 in. (880 mm.)
Swing Over Cross Slide 24 in. (610 mm.)
Swing Over Gap 52.7 in. (1340 mm.)
Gap Length 23.6 in. (599 mm.)
Distance Between Centers 59 -78.7 in. (600 mm.)
Casting Type One piece (monolithic) bed floor type
Bed Width 22 in.
Bed Way Design 3 e/a with extra ways supporting apron
Bed Width / Lower Way 22 / 26 in. (560 / 660 mm)
Spindle Nose B6
Spindle Nose - Standard / Optional B6
Spindle Speeds 18 Steps
Variable Speed (Optional) 4 steps, infinitely variable
Main Drive Motor, Standard 20 HP (15 kW )
Carriage Bearing 32.25 in. (820 mm.)
Compound Slide Travel 15.75 in. (400 mm.)
Leadscrew Pitch 2 TPI (12 mm.)
Inch Thread Range/Imperial Thread Cutting 0.5 to 28 /(60) (0.5 to 28 /(60))
Metric Thread Range 1 to 56 mm (60) (1 to 56 mm (60))
Longitudinal Feed Range 0.0018 to 0.1 in/rev (0.045~2.55 mm/rev)
Longitudinal Rapid Feeds 80 ipm (2032 mpm)
Cross Feed Range 0.0009 to 0.05 in/rev
Cross Feeds - In/Rev. (Mm/Rev.) Cross Feeds - In/Rev. (Mm/Rev.) (0.022 to 1.28 mm/rev)
Cross Rapid Feeds 50 ipm (1270 mpm)
Cross Slide Travel 26.375 in. (670 mm.)
Module Thread 0.25 to 14(60) (0.25 to 14(60))
Diametral Thread Range 2~112 (60) (2~112 (60))
Diameter of Quill 4.5 in. (Ø 115 mm)
Quill Diameter 7.875 (Ø 200 mm.)
Quill Travel 7.875 in. (Ø 200 mm.)
Quill Speed Ratios 1:1 & 4:1
Center MT # 6
Bearing Surface on Bed Ways 19.75 in. (500 mm.)
Main Motor 20 HP (STD.), 30 or 40 HP (OPT.) (15 kW (STD.), 22 or 30 kW (OPT.))
Based on 80" (2000mm) Centers 22,000 lbs. (10,000 kgs)
Based on 80" (2000mm) Centers - Lbs. 22,000 lbs.
Based on 80" (2000mm) Centers - Kgs. 10,000 kgs
Based on 80" (2000mm) Centers Gross Weight 24,000 lbs. (11,000 kgs)
Between Centers 11,00 lbs. STD Tailstock, 14,500 lbs. Tailstock w/ built-in center (4,989 kgs. STD Tailstock, 6,577 kgs. Tailstock w/ built-in center)
Between Centers, With one Steady Rest 14,00 lbs. STD Tailstock, 17,500 lbs. Tailstock w/ built-in center (6,350 kgs. STD Tailstock, 7,938 kgs. Tailstock w/ built-in center)
Between Centers, With Two Steady Rests 17,00 lbs. STD Tailstock, 20,500 lbs. Tailstock w/ built-in center (7,711 kgs. STD Tailstock, 9,298 kgs. Tailstock w/ built-in center)
Work Piece Capacity, Between Centers, Unsupported 14,500 lbs. (6,577 kgs)
Work Piece Capacity, Between Centers, With 1 Steady Rest 17,500 lbs. (7,938 kgs)
Work Piece Capacity, Between Centers, With 2 Steady Rests 20,500 lbs. (9,298 kgs)

 

CLICK HERE FOR CONTACT INFORMATION 

© 2017 Smith Machinery Company, Inc. All rights reserved.