GHT8 - SMITH MACHINERY COMPANY, INC buys and sells Murata Wiedemann, turret presses and punches, press brakes, CNC lasers, shears, lathes and more!
Ebay
Language Translator

GHT8

Turret number of stations, bi-directional 4
Diameter of housing Nominal tool size 1.6 in. (40 mm. )
Headstock diameter of spindle bore 5.9 in. (150 mm. )
Diameter over bed ways 62.99 - 78.74 in. (1,600 - 2,000 mm. )
Distance Between Centers 39.7 - 118.1 in. (1,000 - 3,000 mm optional)
Feeds rapid traverse rate Longitudinal/Cross 315 IPM (8,000 mm/min. )
Headstock spindle nose 15
Height of center (from flat way) 31.5 - 41.34 in. (800 - 1,050 mm. )
Height to flat slide ways 15.55 in. (395 mm. )
Main standard motor 68.3 / 87.2 HP (51 / 65 kW)
Max. distance from nose to turret 47.2 - 49.4 in. (1,200 - 1,255 mm. )
Maximum Swing over cross slide 35.43 - 51.18 in. (900 - 1,300 mm. )
Maximum torque 6,073 / 7736 ft-lbs. , 7,374 / 9,218 ft-lbs. (8,400 / 10,700 Nm., 10,000 / 12,500 Nm. )
Min. distance from nose to turret 7.9 - 10 in. (200 - 255 mm. )
Spindle diameter at the front bearing 10.24 in. (260 mm. )
Tailstock diameter of quill 9.4 in. (240 mm. )
Tailstock quill travel 10.6 in. (270 mm. )
Speed range I 0 - 70 RPM
Speed range II 0 - 180 RPM
Speed range III 0 - 355 RPM
Speed range IV 0 - 710 RPM
Spindle Speed Range 4 ranges: 0 - 710 RPM
Swing Over Bed Ways 78.74 in. (2,000 mm.)
Swing Over Cross Slide 51.18 in. (1,300 mm.)
Travel of cross slide 39.4 in. (1,000 mm.)
Width of bed across ways 39.4 - 51.18 in. (1,000 - 1,300 mm. )
Working feed Longitudinal/Cross/Cross Slide 0 - 300 IPM (0 - 8,000 mm/min. )
Feeds working feed longitudinal 0 - 300 IPM (0 - 8,000 mm/min. )
Feeds working cross 0 - 300 IPM (0 - 8,000 mm/min. )
Feeds travel of cross slide (X) 35.4 - 39.4 in. (900 - 1,000 mm. )
Turret type Square Automatic Turret
Weight capacities Part chucked with CG no further than 11.02 (280 mm) 6,944.6 - 8,815.5 lbs. (3,150 - 4,000 kg. )

 

CLICK HERE FOR CONTACT INFORMATION

© 2017 Smith Machinery Company, Inc. All rights reserved.