SPECIFICATIONS: STOCK WIDTH --------------------------------- 3/8 TO 6 in
MAXIMUM STOCK THICKNESS (FULL WIDTH) -------- .060 in
MAXIMUM STOCK THICKNESS WIDTH --------------- .080 in
MINIMUM STOCK THICKNESS --------------------- .020 *
FEED STROKE --------------------------------- 0 TO 6-5/8
MAXIMUM STROKES (FULL STROKE) --------------- 120 PER MINUTE
STROKE LENGTH ACCURACY ---------------------- TO WITHIN .001
RECOMMENDED AIR PRESSURE -------------------- 80 TO 100 PSI

ALL SPECIFICATIONS BASED ON MILD STEEL AND 100 PSI INPUT AIR
SUPPLY.

* MATERIAL UNDER .020 REQUIRES SPECIAL GUIDING. FEATURES: SAFETY GUARDS ARE MOUNTED TO BOTH SIDES OF THE MACHINE. GUARDS
MUST BE KEPT IN PLACE AT ALL TIMES TO AVOID THE POSSIBILITY OF
THE OPERATOR COMING INTO CONTACT WITH MOVING MACHINERY MEMBERS.
THE GUARDS PIVOT OUT FOR MAINTENANCE OR ADJUSTMENT AND ARE
FABRICATED FROM EXPANDED METAL TO PERMIT VISUAL OBSERVATION OF
STOCK NOW.

THE CLAMPING ANVILS IN BOTH THE GRIPPER & RETAINER ASSEMBLIES
ARE MADE FROM HARDENED STEEL AND ARE SERRATED.

THE STOCK WILL BE GRIPPED ON ONE SIDE AND CARRIED FORWARD INTO
THE DIE. AN AIR OPERATED RETAINER HOLDS THE STOCK SECURELY IN
POSITION WHILE THE GRIPPER HEAD IS ON THE RETURN STROKE.
INTERLOCKING ACTUATION OF THE GRIPPER AND RETAINER IS PERFORMED
BY A PRESSURE SEQUENCE VALVE TO INSURE CONSISTENT FEEDING. THE
GRIPPER IS CUSHIONED AT EACH END BY AN AIR CHECK ASSEMBLY.

HEAVY DUTY RIGHT ANGLE STROKE LENGTH ADJUSTMENT ASSEMBLY:
THE STROKE LENGTH IS INFINITELY ADJUSTABLE FROM 0 TO 6-5/8.
A RIGHT ANGLE BEVEL GEAR STROKE LENGTH ADJUSTMENT HANDWHEEL
IS POSITIONED OPPOSITETHE MATERIAL TO PREVENT HAND CONTACT
WITH SHARP EDGE OF STOCK. THE HANDWHEEL IS COUPLED TO A LARGE
DIAMETER STROKE ADJUSTMENT SCREW WITH HARDENED END STOP. A
HEAVY DUTY CLAMP BLOCK IS USED TO LOCK THE STROKE ADJUSTMENT
SCREW AT THE DESIRE LENGTH.

AN OVERSIZED CYLINDER PISTON ROLL WITH DUAL ESNA LOCK-NUTS
PROVIDES FIRM GRIPPER TO CYLINDER CONNECTION. THE OVERSIZED
CYLINDER PISTON ROD ALSO INCREASES GRIPPER RETURN STROKE
SPEED. GUIDE BAR END RETAINER PLATES LOCK THE GUIDE BARS IN
POSITION.

THE STOCK IS GUIDED ALONG ITS EDGE AGAINST HARDENED EDGE GUIDES
MOUNTED AT BOTH ENTRY AND EXIT ENDS OF THE FEED.

ROLLER WHEELS SUPPORT THE STOCK FOR ITS LENGTH AND WIDTH IN
THE FEED TO PREVENT SAGGING OF THIN MATERIAL.

FILTER, REGULATOR, LUBRICATOR WITH QUICK DUMP AND INTEGRAL
SAFETY AIR LOCKOUT VALVES:
A FILTER, REGULATOR AND LUBRICATOR WITH QUICK DUMP IS SUPPLIED
TO CONDITION THE AIR FEEDS INPUT AIR SUPPLY. THE QUICK DUMP
AUTOMATICALLY RELEASES WATER AND CONTAINMENTS WHEN AN EXCESS
LEVEL IS REACHED. THE SAFETY AIR LOCKOUT VALVE EXHAUSTS COM-
PRESSED AIR ON THE AIR FEED SYSTEM WHEN SHIFTED TO IT CLOSED
POSITION. THE VALVE MAY BE LOCKED IN CLOSED POSITION WITH A
CUSTOMER SUPPLIED PAD LOCK.

MOUNTING BRACKET WITH OUTBOARD SUPPORT:
THE AIR FEED IS MOUNTED TO THE PRESS TO MEANS OF A RIGID ANGLE
BRACKET, ATTACHED TO THE SIDE OR CAN BE INSTALLED DIRECTLY ON
THE BOLSTER. FOR OUTBOARD SUPPORT WE WUPPLY AN ADJUSTABLE
HEAVY DUTY H-TYPE SUPPORT LEG.

PILOT PIN ELECTRICAL CIRCUIT:
THIS UNIT HAS ELECTRICAL CONTROLS AND IS CYCLED FROM A LIMIT
SWITCH (SUPPLIED WITH FEED) MOUNTED ON THE PRESS SO AS TO BE
TRIPPED ON THE DOWN STROKE OF THE PRESS. WHEN THE LIMIT SWITCH
IS TRIPPED IT ENERGIZES A SOLENOID VALVE WHICH IN TURN CYCLES
THE FEED.

PROVISION IS MADE IN THE ELECTRICAL CONTROLS TO PERMIT THE
FEED TO BE USED WITH DIES HAVING PILOT PINS OR DIES NOT HAVING
PILOT PINS. THE CHOICE IS THROUGH A SELECTOR SWITCH FOR
OPERATOR CONVENIENCE AND SAFETY, THE ELECTRICAL CIRCUIT IS
OUTBOARD MOUNTED TO ELIMINATE THE OPERATOR HAVING TO REACH
ACROSS THE FEED BED.

FIVE ROLL STRAIGHTENER MODEL #LS-6:
A FIVE ROLL STRAIGHTENER, MODEL #LS-6 IS MOUNTED BEHIND THE AIR
FEED SO THAT THE POSITION OF THE STRAIGHTENER ALWAYS REMAINS
THE SAME. PRECISION MACHINED STRAIGHTENER FACE AND RETAINER
END MEMBER INSURES CONSISTENT MATERIAL TRACKING.

FIVE HARDENED AND GROUND BALL BEARING ROLLERS ARE MOUNTED SO
THE STOCK IS FLEXED BETWEEN THEM. THE LOWER ROLLS ARE FIXED
IN POSITION, THE UPPER ROLLS ARE ADJUSTABLE THROUGH A HAND
CRANK OPERATED FROM THE OPERATORS SIDE OF THE FEED.

*IF MARKING OF MATERIAL IS A PROBLEM, A POWER STRAIGHTENER IS
RECOMMENDED.

RECOMMENDED FEED OPTIONS:
DIGITAL STROKE READOUT:
FOR SAVING TIME IN SET UP OEPRATION, WE OFFER A DIGITAL STROKE
LENGTH ADJUSTMENT. THIS VISUAL INDICATOR, GRADUATED IN
THOUSANDTHS, PERMITS THE OPERATOR TO REMAIN STANDING AT ONE
STATION AND VISUALLY DETERMINE WHEN HE HAS ARRIVED AT THE FEED
LENGTH INCREMENT DESIRED.

THE FEED LENGTH INDICATOR CONSISTS OF A COUNTER AND ALL
NECESSARY COMPONENTS REQUIRED TO COUPLE THIS DEVICE WITH THE
STANDARD MANUAL STROKE ADJUSTMENT CONTROL. A CLAMP IS REQUIRED
TO LOCK THE MECHANISM AT THE DESIRED FEED LENGTH INCREMENT,
ASSURING ACCURACY AND REPEATABILITY.

COMPLETE MAINTENANCE SEAL KIT:
AS A SERVICE TO OUR CUSTOMER, WE OFFER AN EFFECTIVE PREVENTIVE
MAINTENANCE SEAL KIT WHICH CONSISTS OF THE FOLLOWING:
- CYLINDER SEALS AND GASKETS
- VALVE SEALS AND GASKETS
- QUICK EXHAUST GASKET
- GRIPPER AND RETAINER SPRINGS
- GRIPPER AND RETAINER PISTON in U in RINGS
- in U in CUPS (LARGE AND SMALL) in O in RINGS
FOR THE AIR CUSHION

MANUAL PINCH ROLLS:
A SET OF PINCH ROLLS ARE MOUNTED ON ENTRY TO THE STRAIGHTENER.
THESE ARE USED TO THREAD MATERIAL THROUGH THE FEED AND INTO
THE DIE AREA, WHILE THE MACHINE IS IN LOAD POSITION. THE UPPER
ROLL IS ADJUSTABLE AND THE LOWER ROLL IS OPERATED THROUGH A
HAND CRANK.

CURVED STOCK SUPPORT:
A CURVED STOCK SUPPORT IS MOUNTED AT THE ENTRY END OF THE FEED
TO SMOOTHLY SUPPORT THE STOCK FROM THE LOOP TO THE PASSLINE OF
THE AIR FEED.

ADJUSTABLE CABINET BASE MODEL NO. SB-31:
THE UNIT HAS ONE AIR FEED WHICH IS MOUNTED ON A FABRICATED
CABINET BASE WITH PROVISION FOR ATTACHMENT TO SIDE OF A PRESS.
A PASSLINE HEIGHT OF 46 INCHES, PLUS OR MINUS 6 INCHES IS
PROVIDED. THE VERTICAL ADJUSTMENT IS THROUGH JACKS OPERATED
FROM A SINGLE HAND CRANK.

THE FEED IS ADJUSTABLE FOR MATERIAL WIDTHS FROM 3/8 TO 6 INCHES
WIDE. THE LATERAL ADJUSTMENT IS MADE FROM A HAND CRANK ON EACH
SIDE OF THE CABINET. DUAL LEAD ADJUST SCREWS ARE SUPPLIED TO
MAINTAIN PERPENDICULAR FEED ALIGNMENT TO THE DIE.

TEMPLET GUIDE:
A TEMPLET GUIDE PREVENTS BUCKLING AND SAGGING OF THIN GAGE
MATERIAL. SPECIFICATIONS AND PRICING ARE SUBJECT TO VERIFICATION.

CAUTION: FOR OPERATOR SAFETY, DISCONNECT ALL AIR AND
ELECTRIC POWER - PRIOR TO SERVICING MACHINE. A NOISE
CONTROL PACKAGE GREATLY DECREASES THE NOISE LEVEL OF THE
AIR FEED. THIS IS ACCOMPLISHED THROUGH EXHAUST MUFFLERS
WITH HIGH FLOW CHARACTERISTICS. OPTIONAL FEATURES: DIGITAL STROKE READOUT ---------------------- $ 595.00
MANUAL PINCH ROLLS FOR STRAIGHTENER --------- $ 995.00
COMPLETE PREVENTATIVE MAINTENANCE SEAL KIT -- $ 335.00
CURVED STOCK SUPPORT SECTION ---------------- $ 450.00
ADJUSTABLE CABINET BASE MODEL #SB-31 -------- $2,455.00
TEMPLET GUIDE ------------------------------- $ 330.00 DELIVERY: 6 - 8 WEEKS FROM RECEIPT OF PURCHASE ORDER. HOWEVER,
A SHORTER DELIVERY CAN BE MADE, DEPENDING ON THE
AVAILABILITY OF PARTS IN STOCK.