SPECIFICATIONS: MAXIMUM GRINDING LENGTH ---------------------- 18 in
MAXIMUM GRINDING LENGTH ---------------------- 18 in
MAXIMUM GRINDING WIDTH ----------------------- 6 in
MAXIMUM TABLE TRAVELS (LONGITUDINAL) --------- 19 in
(CROSSFEED) --------- 7 in
MAXIMUM DISTANCE BETWEEN SPINDLE CENTER TO
TABLE SURFACE ------------------------------- 18 in
SUITABLE MAGNETIC CHUCK SIZE ----------------- 6 in X 18 in
DOWNFEED HANDWHEEL (PER GRADUATION) ---------- 0.0001 in
(PER REVOLUTION) ---------- 0.050 in
CROSSFEED HANDWHEEL (PER GRADUATION) --------- 0.0005 in
(PER REVOLUTION) --------- 0.100 in
SPINDLE AND MOTOR (DIRECT DRIVE) ------------- 2 H.P./3450 RPM
GRINDING WHEEL (DIAMETER) -------------------- 8 in
(WIDTH) -------------------- 1/2 in
(HOLE SIZE) -------------------- 1-1/4 in
PACKING DIMENSIONS (APPROX.) ----------------- 41 in X 47 in X 76 in
MACHINE NET WEIGHT (APPROX.) ----------------- 1,498 LBS.
VOLTAGE (UNLESS OTHERWISE SPECIFIED) --------- 230 VOLT

NOTE: STANDARD MACHINE COLOR IS GRAY & WHITE
* STANDARD ACCESSORIES
** FACTORY INSTALLATION IS RECOMMENDED

NOTE: ONE YEAR PARTS AND LABOR WARRANTY! FEATURES: - 2 H.P. LOW VIBRATION SPINDLE MOTOR
- SPINDLE RUN-OUT SHALL BE WITHIN 0.000060 in
- HIGH PRECISION CARTRIDGE-TYPE SPINDLE EQUIPPED WITH 4
PIECES
OF CLASS 7 ANGULAR CONTACT BALL BEARINGS, SUITABLE FOR
HEAVY-DUTY GRINDING.
- HARDE EQUIPPED WITH: STANDARD ACCESSORIES:

- HALOGEN MACHINE LAMP
- DIAMOND DRESSER & DIAMOND
- AUTOMATIC LUBRICATOR
- ONE GRINDING WHEEL AND HUB
- LEVELING SCREW SET & PADS
- WHEEL EXTRACTING SCREW & NUTS
- BALANCING ARBOR
- TOOLBOX AND TOOLS
- OPERATING MANUAL AND PARTS LIST SPECIFICATIONS AND PRICING SUBJECT TO VERIFICATION AND CHANGE
WITHOUT NOTICE!! OPTIONAL FEATURES: Permanent Magnetic Chucks:
#BL09-0102-1 O. S. Walker $
2,100.00
#B09-0102 KANETSU or CHEVALIER (6 in x 18 in ) $
930.00
#B09-0104 Inclinable 4 in x 7 in $
780.00
#B09-0105 Inclinable 6 in x 12 in $
990.00
#C09-0127 Fine Pole Chuck (0.5 1.5mm) $
620.00

Electromagnetic Chuck & Controls:
#B09-0601 Inclinable 6 in x 12 in $
1,300.00
#BL09-0606-1 O. S. Walker LBP (6 in x 18 in ) $
1,800.00
#B09-0106 CHEVALIER (6 in x 18 in ) $
1,200.00
#BL23-0603-1 O. S. Walker manual type $
450.00
#BL23-0603-2 O. S. Walker automatic type $
1,080.00
**#B23-0901 Chuck controller w/variable holding/auto
demagnetize for elec. chucks $
810.00
NOTE: BL23-0901 or BL23-0603-1/BL23-0603-2 must be ordered
with either of the electromagnetic chucks.

FAGOR Digital Readout System:
**#BL45-0101-F1Y Elevating digital readout $
1,150.00
**#BL45-0102-F1Z Crossfeed digital readout $
1,000.00
**#BL45-0103-F2 Crossfeed & elevating digital readout
$ 1,850.00
Installation charge: Single axis (net) $
350.00
Installation charge: Double Axis (net) $
500.00

Precision Vise:
#B11-0101 2 in x 3 in $
170.00
#B11-0102 2-1/2 in x 4 in $
220.00
#B11-0103 3 in x 4 in $
300.00
#B11-0104 3-1/2 in x 5 in $
470.00
#B11-0105 4 in x 5 in $
530.00

Dressing Wheel & Attachments:
#B03-0601 Diamond dresser with diamond (0.5k)
$
150.00
*#B03-0101 Diamond dresser with diamond (0.1k)
$ 75.00
**#B13-0101 Parallel dressing attachment $
780.00

Balancing Stand:
#B15-0102 Wheel balancing stand w/leveling bubble
$ 300.00
#B15-0601 Balancing stand (roller type) $
390.00

Coolant & Dust Suction System:
#B17-0101 Combination coolant & dust collector (9 g.)
$ 1,350.00
#B17-0102 Heavy duty dust collector $
1,030.00
#B17-0105 Coolant equipment w/magnetic separator (13-
1/4
g.) $
1,800.00
#B17-0106 Combination coolant & dust collector
w/magnetic separator (9 gals.) $
2,400.00
#B17-0107 Coolant system with paper filter (22-1/2
g.)
$ 1,400.00
#B17-0110 Coolant system (11.1 g.) $
600.00
#B17-0901 Coolant system (24 g.) $
700.00
#B19-0102 Splash guard & nozzle $
360.00
#0203-00019001 Exhaust hood (must be ordered with dust
collector) $
91.00

Frequency Controls:
**#BL48-0101 Variable spindle speeds by A/C frequency
control, 230V $
2,650.00
(must be installed at factory)
**#BL48-0102 Variable spindle speeds by A/C frequency
control, 460V $
2,950.00
(must be installed at factory)

Other Accessories & Misc. Items:
*#B01-0101 Halogen machine lamp $
80.00
*#B05-0101 Wheel hub (flange & weights) $
85.00
#B07-0101 Punch former $
2,350.00
#B41-0106 Universal wheel guard for side forming
$
320.00
C.E. Conformity Cost $
520.00
DELIVERY: SUBJECT TO STOCK