





| Rectangular Capacity at 90° | 18" H x 18" W |
| Round Capacity at 90° | 18" |
| Square capacity | 18" |
| Blade Size | 1 1/2" x 19' 2" |
| Blade Speed | 50-350 SFM VFD |
| Blade Drive | 10 HP |
| Auto Multi-Indexing | 0-34" |
| Hydraulic Tank Capacity | 9.5 Gallons |
| Coolant Tank Capacity | 30 Gallons |
| TABLE HEIGHT | 31" |
| Machine Voltage | 480 V |
| Machine Weight | 8,500 |
| Machine Dimensions (Width x Depth x Height) | 127" x 88" x 92" |
Dual -Post Frame Construction: The H-18A’s rigid dual-post column design eliminates twist and deflection for perfectly square cuts. The one-piece welded frame requires no alignment, maintaining precision even under heavy loads.
Automatic multi-indexing Shuttle:A cast-iron shuttle vise automatically indexes material up to 34” (863 mm) in a single stroke, featuring automatic kerf compensation for precise cut length.
Steel guide arms ensure constant alignment. The idler side guide arm is mechanically linked to the moveable front vise jaw, maintaining proper spacing at all times.
Hydraulic & Feed system:The H-18A features a hydraulic positive down feed and a high-resolution feed-rate valve, enabling constant feed pressure when cutting difficult alloys.
Full-capacity, full-stroking hydraulic vises provide secure material clamping, while variable vise pressure allows delicate thin-wall materials to be cut without deformation.
Laser Light: Light: Project a bright, visible line onto the material for precise alignment and faster setup for manual cuts.
Direct-Drive Blade System:A 10 HP (7.5 kW) VFD direct-drive motor transmits full power to the blade. No belts or pulleys for higher torque, reduced vibration, and minimal maintenance.
Heavy-duty cast-iron band wheels and hydraulic carbide guide tensioning ensure smooth tracking and blade stability.
Operator Interface & Safety:The AutoSet Control interface features built-in diagnostics, job memory for 999 programs with a 10-job queue.
Safety features include:
· Blade breakage and out-of-stock switches
· Safety door interlocks
· Work light and flood coolant with wash-down hose
The H-18A also includes:· Automatic chip-removal auger keeps the work area clean.
· Robust steel base integrates coolant and hydraulic systems.
· Easy-access panels simplify maintenance.
· Replaceable wear plates extend machine life.
· Replaceable blade brush cleans the blade and prevents chip buildup.
Optional Machine Features:
Full capacity hydraulic overhead bundling – two vises : $6,900
Mist lubrication system - shop air required : $1,900
Power Transformer- change in house power from 480 v to 208 v - $1,700
Power Transformer - change in house power from 480 v to 240 v - $1,700
Power Transformer - change in house power from 480 v to 575 v - $1,700
Remote console – 15’ (4.5 m) cord : $5,500
Roller discharge table : $5,400
Vertical alignment rollers – on machine : $1,800
Blade deviation monitors : $4,500
Idler conveyors – Standard Head (26” W x 31”H)
Type 2 - 5’ in feed/ out feed idler conveyor:$4,700
Type 2 - 10’ in feed/ out feed idler conveyor : $8,900
Powered conveyors – Standard Head (26” W x 31”H)
Type 2 - 5’ in feed/ out feed powered conveyor: $11,500
Type 2 - 10’ in feed/ out feed powered conveyor : $16,500
Additional 10’ power add on section: $11,500
Pneumatic clutch:$4,500
Accessories for both idler and powered conveyors
Filler plates – for 5’ conveyor:$1,900
Filler plates – for 10’ conveyor:$3,800
Coolant drip pan – for 5’ conveyor : $1,900
Coolant drip pan – for 10’ conveyor : $3,800
Vertical alignment roller : $2,500
Forklift cut outs :$2,500
Warranty:
Two year parts, One year labor*
Labor provided by dealer
Our knowledgeable staff will assist you with all of you questions.
Contact Us