(1) NEW KINGSTON 34″ x 120″ HOLLOW SPINDLE LATHE, MODEL #: HP-34120

SPECIFICATIONS
FILES & ATTACHMENTS

Swing Over Bed	34 inches
Swing Over Cross Slide	25.1 inches
Distance Between Centers	120 inches
Width of Bed	22 inches
Height of Center from Leg Bottom	48.6 inches
Spindle Bore	7.09 inches
Type of Spindle Nose	ASA A2-15
Number of Spindle Speeds	16
Spindle Speed	8 – 700 RPM
Number of Feed Changes	40 Kinds
Range of Feeds per Revolution	0.0024” – 0.0337”
Longitudinal Cross	1/2 of Longitudinal Feeds
Leadscrew Diam. & Threads per Inch	1.9” / 2 TPI
Threading range	Whitworth 1 to 28 TPI (50), Metric 1 to 28mm Pitch (41), Module 0.5 to 7 M (20), D.P. 4 to 56 D.P. (40)
Maximum Travel of Compound	9.4 inches
Maximum Travel of Cross Slide	21.2 inches
Tailstock Quill Travel	11.8 inches
Tailstock Quill Diameter	5.1 inches
Tailstock Center	M.T. #6
Main Drive Motor	30 HP (22 kw)
Coolant Pump Motor	1/4 HP
Floor Space	W: 87” L: 238”
Weight (lbs)	15200 pounds

Equipped With

STANDARD EQUIPMENT & ACCESSORIES:

• Main Motor: 30 HP, 230V / 460V, 3 Phase, 60 Cycle,

Switch and Wiring Complete

• 7.1” Spindle Bore

• Spindle Nose: ASA-A2-15

• Rear Chuck Adapter Installed

• Front (Sliding) & Rear Chuck Guard

• Set of Change Gears for Special Leads

• Hardened and Ground Bedways

• Tool Slide with T-Slot

• Thread Chasing Dial

• 4-Way Rapid Traverse

• Hydraulic Brake System

• Self-Spacing Supports for Lead Screw, Feed Rod &

Control Rod

• Coolant System with Pump and Piping

• Tailstock Safety Locking Chock

• 2-Speed Drive Tailstock Quill

• Pull Drawer Chip (Coolant) Pan

• UL Electrical Components & Cables

• Tool Box with Necessary Wrenches & Spanners

• Instruction Manual and Parts List
OPTIONAL ACCESSORIES:

11.9” Steady Rest with Roller Jaws (Min. Capacity 1.25”) $ 4,350

19.7” Steady Rest with Roller Jaws (Min. Capacity 11.1”) $ 5,350

23.5” Steady Rest with Roller Jaws (Min. Capacity 11.9”) $ 7,500

7.9” Follow Rest (Min. Capacity 0.75”) $ 3,100

Roller Bracket (34”: 15.75” – 27.5” / 40”: 20” – 33.5”) $ 8,500

Telescopic Taper Attachment (Hardened & Ground) $ 6,800

Drilling Attachment $ 3,250

Micrometer Carriage Stop $ 850

Turret Carriage Stop $ 850

LED Work Light $ 295

Bison Super Precision Live Center MT#6 (8140 lbs, 0.0002 max runout) $ 865
Add Limit Switch to Chuck Guard $ 165

Aloris DA Tool Post Only $ 1,575

Aloris DA Tool Post + 6 Holders (Set #5) $ 3,150

Aloris EA Tool Post Only $ 2,450

Aloris EA Tool Post + 6 Holders (Set #6) $ 4,850

Newall 2-Axis Digital Readout + Installation (Net): HP-2000 $4,900 + $550

HP-3000 $6,000 + $600

HP-4000 $7,500 + $700

HP-5000 $9,750 + $800

HP-6000 $10,500 + $900

HP-7000 $13,200 + $1,000

Chip Conveyor Upon Request

Toolpost Guard $ 1,350

Full Length Splash Guard Upon Request

NRTL / UL Certification Net $ 6,500
WORKHOLDING:

Bison 25” 3-Jaw Forged Steel Chuck (A2-15, 9.92” hole, 2pc jaws) $ 18,950

Bison 32” 3-Jaw XHD Chuck (A2-15, 10.75”, 2pc jaws) $ 38,120

Bison 20” 4-Jaw XHD Chuck (A2-15, 8.07” hole, 2pc jaws) $ 8,500

Bison 25” 4 Jaw Forged Steel Chuck (A2-15, 6.3” hole, 2pc jaws) $ 13,200

Bison 25” 4-Jaw XHD Chuck (A2-15 10.63”, 2pc jaws) $ 14,200

Bison 28” 4 Jaw XHD Chuck (A2-15, 10.63” hole, 2pc jaws) $ 19,250

Bison 32” 4-Jaw XHD Chuck (A2-15, 10.63”, 2pc jaws) $ 26,195

26” Face Plate $ 1,850

32” Face Plate $ 2,700

Other Chucks [i.e. Bison, Toolmex, Pratt Burnerd] Upon Request

Precision Rigging

Precision Finishing

SMC Auctions

(1) NEW KINGSTON 34" x 120" HOLLOW SPINDLE LATHE, MODEL #: HP-34120

Equipped With

No Files or Attachments Available

Not Quite What You're Looking For?

Get in Touch

Menu

Our Finance Options

Proud Member