QUILL:
POWER QUILL FEEDS 0.0015, 0.003, 0.006 IN/REV (0.038, 0.076, 0.15 MM/REV)
SPINDLE TAPER R-8 / *NST #40
QUILL DIAMETER 3.38” (85.73 MM)
QUILL TRAVEL (MANUAL) Z-AXIS 5” (127 MM)
MACHINE DIMENSIONS:
COLUMN TURRET DIAMETER (GRADUATED) 15” (380 MM)
KNEE WIDTH 13.77” (350 MM)
KNEE →COLUMN BEARING LENGTH 31.49” (800 MM)
SADDLE & TABLE BEARING LENGTH 20.07” (510 MM)
RAM & TURRET BEARING LENGTH 17.71” (450 MM)
RAM TOTAL LENGTH 32.82” (835 MM)
PHYSICAL:
WEIGHT 2,645 LBS (1,200 KGS)
HEIGHT 83.46” (2,120 MM)
WIDTH 65.59” (1,666 MM)
DEPTH 78.11” (1,984 MM)
ELECTRICS (3 PHASE, 60 HERTZ) 220 VOLTS / *440 VOLTS
OUTSTANDING FEATURES:
• MECHANICAL INFINITE VARIABLE SPEED HEAD
• FULL HORSEPOWER AT ANY RPM WITH "CONSTANT POWER" MAIN MOTOR
• R-8 SPINDLE TAPER
• INFINITE SPEED RANGE OF UP TO 4,500 RPM
• 3.38" (85 MM) QUILL HARDENED & GROUND
• HARDENED & GROUND WAYS WITH TURCITE BEARING SURFACE
• FLOOD COOLANT SYSTEM
• ALL LEADSCREWS ARE THREAD ROLLED AND GROUND
STANDARD EQUIPMENT:
▪ SPINDLE TAPER R-8 WITH CLASS 7 HI-PRECISION BEARINGS
▪ BASE SPLASH GUARD-CHIP PAN
▪ RUBBER WAY COVERS
▪ FLOOD COOLANT SYSTEM
▪ DRAW BAR
▪ HARDENED & PRECISION GROUND WAYS
▪ BASIC SERVICE TOOL KIT
▪ LED WORKLIGHT
▪ LEVELING BOLTS & PLATES
▪ 3PH/60HZ/220V ELECTRICS (440V ELECTRICS OPTIONALLY AVAILABLE)
▪ OPERATOR'S MANUAL & PARTS LIST
OPTIONAL FEATURES:
* NT#40 SPINDLE TAPER W/QUILL AND DRAW BAR: $1,732.00
• MUST BE DECIDED AT THE TIME OF ORDER
* CAT#40 SPINDLE TAPER W/HI-PRECISION: $3,372.00
• MUST BE DECIDED AT THE TIME OF ORDER
SPECIAL ELECTRICS:* 220V ELECTRICS
• INCLUDED AS STANDARD
* 440V ELECTRICS: PRICE ON REQUEST
* 480V ELECTRICS: PRICE ON REQUEST
* UL-508A INDUSTRIAL CONTROL PANEL: $4,900.00
* NFPA-79 ELECTRICS CERTIFICATION: PRICE ON REQUEST
OPTIONAL ACCESSORIES:CONVERSION PACKAGES:* VERTICAL‑TO‑HORIZONTAL CONVERSION PACKAGE (USING AN R-8 TAPER HEAD): $6,572.00
• ARBOR R-8 TAPER
• ARBOR SUPPORT R-8 TAPER
• RIGHT ANGLE ATTACHMENT R-8 TAPER
• X AXIS GEARED POWER FEED
* VERTICAL‑TO‑HORIZONTAL CONVERSION PACKAGE (USING A #40 TAPER HEAD): $6,947.00
• ARBOR #40 TAPER
• ARBOR SUPPORT #40 TAPER
• RIGHT ANGLE ATTACHMENT #40 TAPER
• X AXIS GEARED POWER FEED
HEAD:
* 5HP BALDOR MOTOR ELECTRONIC VARIABLE SPEED (EVS) HEAD: $1,454.00
* NST #40 SPINDLE TAPER, W/4 HI PRECISION CLASS 7 BEARING: $458.00
• MUST BE DECIDED AT TIME OF ORDER
* CAT #40 SPINDLE TAPER, W/4 HI PRECISION CLASS 7 BEARING: $509.00
• MUST BE DECIDED AT TIME OF ORDER
* QUILL KIT, VERTICAL KNEE-MILL, ABS TYPE (ABSOLUTE ENCODER SYSTEM): $771.00
• 5″ (127 MM) OF TRAVEL
• 0.0004″ (0.01 MM) RESOLUTION
• EASY TO READ LCD
• NOTE: THIS SCALE DOES NOT INTEGRATE WITH OUR DRO SYSTEMS
* POWER DRAW BAR, PNEUMATIC, USE WITH STANDARD DRAW BAR (POWER UNIT ONLY) (R8, NST 40, CAT 40): $1,504.00
* QUICK INDEX QUILL DOWN FEED HANDLE: $251.00
* QUICK POSITION DOWN FEED QUILL STOP: $112.00
POWER FEEDS:
* SERVO #350 X-POWER FEED, LONGITUDINAL, 110V: $2,180.00
* SERVO #350 Y-POWER FEED CROSS, 110V: $2,330.00
* SERVO #350 Z POWER FEED, KNEE LIFT, 110V: $2,366.00
* LAGUN LIGHTING, X-AXIS, LONGITUDINAL POWER FEED; 110V: $1,444.00
* LAGUN LIGHTING, Y-AXIS, CROSS POWER FEED; 110V: $1,444.00
* LAGUN LIGHTING, Z-AXIS, VERTICAL KNEE LIFT; 110V: $1,444.00
GEAR TYPE POWER TABLE FEED FOR MILLING:
* X AXIS GEAR POWER TABLE FEED WITH LIMIT SWITCH: $2,808.00
• **REQUEST FLIER FOR MORE INFORMATION ON SPECIFICATIONS**
* Y AXIS GEAR POWER TABLE FEED WITH LIMIT SWITCH: $2,969.00
• **REQUEST FLIER FOR MORE INFORMATION ON SPECIFICATIONS**
* Z AXIS GEAR POWER TABLE FEED WITH LIMIT SWITCH: $2,542.00
• **REQUEST FLIER FOR MORE INFORMATION ON SPECIFICATIONS**
DIGITAL READ OUTS (DRO):
* 2 AXIS FAGOR 400I DRO SYSTEM, 16 X 40: $3,111.00
* 3 AXIS FAGOR 400I DRO SYSTEM W/ QUILL, 16 X 40 X 5
• PRICE ON REQUEST
* 3 AXIS FAGOR 400I DRO SYSTEM W/ KNEE, 16 X 40 X 16
• PRICE ON REQUEST
* 4 AXIS FAGOR 400I DRO SYSTEM W/ QUILL & KNEE, 16 X 40 X 16 X 5: $3,227.00
* 2 AXIS ACU-RITE M203 DRO, 16 X 40: $3,973.00
* 3 AXIS ACU-RITE M203 DRO, W/ QUILL, 16 X 40 X 5: $4,871.00
* 3 AXIS ACU-RITE M203 DRO, W/ KNEE, 16 X 40 X 16: $5,156.00
* 4 AXIS ACU-RITE DRO300 DRO, W/ QUILL & KNEE, 16 X 40 X 16 X 5: $6,651.00
* 2 AXIS NEWALL NMS800 DRO SYSTEM, 16 X 40: $2,582.00
* 3 AXIS NEWALL NMS800 DRO SYSTEM W/ QUILL, 16 X 40 X 5: $3,219.00
* 3 AXIS NEWALL NMS800 DRO SYSTEM W/ KNEE, 16 X 40 X 16: $3,219.00
* 4 AXIS NEWALL NMS800 DRO SYSTEM W/ QUILL & KNEE, 16 X 40 X 16 X 5: $3,436.00
CLAMPS & COLLETS:* CLAMP KIT AND STUD SET52 PCS. 5/8" TSLOTS: $520.00
* SET R-8 COLLETS 1/8" TO ¾"11 PCS.: $568.00
COLLET RACKS:* COLLET RACK FOR R-8 COLLETS; 48 PCS.: $169.00
* COLLECT RACK FOR R-8 COLLECTS; 16 PCS.: $122.00
VISES:* LAGUN 6" ANG LOCK, SWIVEL BASE VISE, 8" OPENING: $1,489.00
* KURT 6" DX6 ANG LOCK VISE, 9" OPENING (OPT: SWIVEL BASE): $1,172.00
* SWIVEL BASE FOR KURT 6” VISE: $1,103.00
DRILL CHUCK:* 1/2" DRILL CHUCK (KEY TYPE) W/ R-8 SHANK: $371.00
* 5/8" DRILL CHUCK (KEY TYPE) W/ R-8 SHANK: $419.00
* 1/2" DRILL CHUCK (KEY TYPE) W/ #40 TAPER: $559.00
* 5/8" DRILL CHUCK (KEY TYPE) W/ #40 TAPER: $602.00
SHELL MILL:* SHELL MILL ADAPTER IN R-8, ¾": $230.00
* SHELL MILL ADAPTER IN R-8, 1": $239.00
* SHELL MILL ADAPTER IN R-8, 1 1/2": $246.00
* SHELL MILL ADAPTER IN # 40 TAPER, ¾”: $352.00
* SHELL MILL ADAPTER IN # 40 TAPER, 1”: $352.00
* SHELL MILL ADAPTER IN # 40 TAPER, 1 1/2”: $366.00
END MILL HOLDERS:
* 1 SET END MILL HOLDERS R8 TAPER; 7PC; 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1": $1,073.00
* 1 SET END MILL HOLDERS-#40 TAPER; 7 PC; 1/8”, 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1”: $2,565.00
ATTACHMENTS:* RIGHT ANGLE ATTACHMENT; R-8: $2,010.00
* RIGHT ANGLE ATTACHMENT; #40 TAPER (3 3/8” QUILL): $2,849.00
ARBORS:* 1" ARBOR, 18-1/4" LONG WITH BUSHINGS AND R-8: $1,097.00
* 1" ARBOR, 18-1/4" LONG WITH BUSHINGS AND #40: $905.00
* ARBOR SUPPORT W/1" ARBOR 9" -R8: $1,387.00
CHUCKS:* COLLET CHUCK W/ SET OF 15 COLLETS FROM 1/8" TO 1", #40: $1,230.00
* #40 100TG COLLET CHUCK W/ 1 SET OF 8 METRIC COLLETS; 6MM, 8MM, 10MM, 12MM, 14MM, 16MM, 18MM, 20MM.: $1,290.00
* 1 SET OF 8 COLLETS- METRIC, TO BE USED WITH COLLET CHUCK 100TG; SIZE 0.24 TO 0.79” (6 TO 20 MM).
• PRICE ON REQUEST
RISER BLOCKS:* 4" RISER BLOCK W/ SPIDER & 4 PC. METRIC HEX BOLTS: $2,159.00
* 6" RISER BLOCK W/SPIDER & 4 PC. METRIC HEX BOLTS: $2,273.00
* 10" RISER BLOCK: $2,560.00
* 12" RISER BLOCK W/ SPIDER & 4 PC. METRIC HEX BOLTS: $2,751.00
ROTARY TABLES:* ROTARY TABLE; 8” DIAMETER HORIZONTAL/VERTICAL WITH INDEX PLATES: $2,285.00
* ROTARY TABLE; 10” DIAMETER HORIZONTAL/VERTICAL WITH INDEX PLATES: $3,123.00
* ROTARY TABLE; 12” DIAMETER HORIZONTAL/VERTICAL WITH INDEX PLATES: $4,046.00
ADJUSTABLE TAILSTOCK:* TAILSTOCK FOR 10” TABLE: $2,138.00
* TAILSTOCK FOR 12” TABLE: $2,245.00
SLOTTING:
* PRECISION-SLOTTING ATTACHMENT, STROKE: 5” (125 MM); 5/8” TOOL CAPACITY.: $7,614.00
• 6 SLOTTING BARS (4MM, 4.5MM, 6MM, 7MM, 8MM, 10MM)
• FLANGE A MOUNTING KIT
• L-SHAPED GROUND PLATE
AUTO LUBRICATION:
* AUTO LUBRICATION SYSTEM: $3,077.00
• RECOMMENDED FOR BALL SCREWS
BALL SCREWS:
* PRECISION BALL SCREWS FOR X & Y AXES: $6,222.00
OTHER ACCESSORIES:
* WAY COVERS, CROSS & VERTICAL: $1,779.00
* MIST COOLANT SYSTEM: $1,475.00
* SPECIAL DECAL FOR FTV (INSTALLED): $1,223.00
TRANSPORTATION:
* WOOD SKID W/ MACHINE WRAPPED IN PLASTIC (NET): $355.00
* COMPLETELY ENCLOSED WOOD CRATE (NET)
• PRICE ON REQUEST
* SHIPPING TO CUSTOMER FACILITY (NET): $1,900.00
• SHIPPING IS DAP AT DOCK. UNLOADING AND RIGGING ARE NOT INCLUDED.
