SPECIFICATIONS: SEPARATE FEED CONTROLS OF BOTH FEED RATE & FEED PRESSURE
MAXIMUM CAPACITIES (ROUND TUBING) 90 DEG.= 4 1/2 in X 45
DEG.=4 in
ROUND SOLID ------------------- 90 DEG.= 3 in
45 DEG.= 2 1/2 in
ROUND TUBING ------------------ 90 DEG.= 4-1/2 in
45 DEG.= 4-1/4 in
SQUARE TUBING ----------------- 90 DEG.= 4-1/2 in
45 DEG.= 4 in
SQUARE SOLID ------------------ 90 DEG.= 3 in
45 DEG.= 2-1/2 in
MITER CAPABILITIES ------------ 135 in (90 DEG.LEFT & 45 DEG.
AT 45 DEG.LEFT,90 DEG & 45
DEGREE DEG. RIGHT)
VOLTAGE ------------------------ 230 OR 460 VOLT/3PH ELEC. EQUIPPED WITH: AIR OPERATED DOUBLE SELF-CENTERING VISE-BURR FREE CUTS
PNEUMATIC POWER DOWN FEED WITH ELECTRIC CONTROLS
EMERGENCY STOP BUTTON
CAPABLE OF SLOTTING
5 HP MOTOR, 3,000 RPM CUTTING SPEED
POSITIVE COG BELT DRIVEN
CHIP DRAWER
MIST COOLANT
30 in MATERIAL LENGTH STOP
RIGHT WITH MITER LOCK STOPS
ONE 13 1/2 in CARBIDE TIPPED BLADE
ONE BLADE WRENCH
ONE GALLON COOLANT TANK WITH MIST LUBRICATION
ONE 13-1/2 in DIAMETER CARBIDE TIPPED BLADE
ONE GALLON CONCENTRATED COOLANT
(MUST SPECIFY VOLTAGE)
THREE YEAR WARRANT (PARTS ONLY)
MADE IN USA SPECIFICATIONS SUBJECT TO VERIFICATION OPTIONAL FEATURES: SQUARE TUBE/DIAGONAL VISE JAWS ------------------ $ 750.00
SPECIAL FORM JAWS (SAMPLES REQUIRED) ------------ $P.O.R.
UNIVERSAL CLAMPING FIXTURE (WHEN ORDERED
SEPARATELY) ------------------------------------- $1,145.00
MAG BRUSH --------------------------------------- $ 89.00
10 ft MATERIAL SUPPLY TRACK ----------------------- $ 605.00
20 ft MATERIAL SUPPLY TRACK ----------------------- $1,185.00
60 in MATERIAL STOP TRACK W/ RIGHT HAND QUICK LOC - $1,245.00
60 in MATERIAL STOP TRACK W/ LEFT HAND QUICK LOC -- $1,245.00
120 in MATERIAL STOP TRACK W/RIGHT HAND QUICK LOC - $1,495.00
120 in MATERIAL STOP TRACK W/ LEFT HAND QUICK LOC - $1,495.00
96 in SG PROGRAMMABLE STOP SYSTEM ----------------- $5,245.00
144 in SG PROGRAMMABLE STOP SYSTEM ---------------- $6,095.00
CPO 350 VARIABLE SPEED RETRO-FIT(MUST SPECIFY
VOLTAGE)----------------------------------------- $2,895.00
CPO 350 VARIABLE SPEED RETRO-FIT (W/5 HP MOTOR- MUST
SPECIFY
VOLTAGE & RPM) ---------------------------------- $4,995.00
ELECTRIC POWER DOWN FEED RETROFIT KIT ----------- $4,995.00
BLADE GUIDE LASER LIGHT (FACTORY INSTALL) ------- $1,095.00
BLADE GUIDE LASER LIGHT (CUSTOMER INSTALL) ------ $ 995.00
DUAL PALM BUTTONS (CPO SERIES) ------------------ $2,495.00
350 NF ECONOMY FABRICATION PACKAGE -------------- $2,125.00 DELIVERY: 90 DAYS