SPECIFICATIONS:
THROAT DEPTH --------------------------------- 9"
ANGLE SHEAR CAPACITY --------------------------6" x 6" x 1/2"
RECTANGULAR NOTCHER -------------------------- 3" x 4" x 1/2"
ELECTRICS -------------------------------------230/460V 3PH
DUAL OPERATOR, 5 STATIONS
95-TON PUNCH STATION
KEYED PUNCH RAM FOR SAFETY
PUNCH GAUGING TABLE WITH FENCE AND SCALE
FEATURES:
140 TON 24" FLAT BAR SHEAR WITH LOW RAKE ANGLE SABRE BLADE
ONE ROUND PUNCH & DIE: MAX DIAMETER 1-1/4"
DUAL OPERATOR ALLOWS TWO OPERATORS TO WORK AT SAME TIME
TWO ELECTRIC REMOTE FOOT PEDALS
PUNCH JOG CONTROL
TWO ADJUSTABLE ELECTRIC STROKE CONTROLS WITH SCALE
ELECTRICAL BOX WITH EMERGENCY PALM BUTTON & LOCK-OUT TAG-OUT
KEYED PUNCH RAM
PUNCH GAUGING TABLE WITH FENCE & SCALE
DIE HOLDER WITH 2" INSERT
PUNCH NUT WITH WRENCH AND STRIPPER
ADJUSTABLE SWING AWAY STRIPPER
NOTCHER TABLE WITH GUIDES
SHEAR TABLE WITH SCALE AND MITER FENCE
TOOL TABLE WORK AREA
SLUG RECEPTACLES
TWO-STAGE HYDRAULIC PUMPS
TWO VALVES
ALL GUARDS COMPLY WITH ANSI B 11-5 STANDARDS
FORKLIFT ACCOMMODATIONS
3-YEAR WARRANTY (PARTS ONLY)
MADE IN USA
NOTES:
SPECIFICATIONS SUBJECT TO VERIFICATION
OPTIONAL FEATURES:
SINGLE PHASE MOTOR, 10 HP 220 VOLT/ 60 HZ $1,300.00
L.E.D. LIGHT PACKAGE-XL/DO (FACTORY INSTALL) -------------------- $ 495.00
LASER LIGHT - BAR SHEAR (FACTORY INSTALL) ----- $1,075.00
PUNCH TABLE EXTENSION --------------------------- $ 295.00
36 in /40 in PUNCH GAUGING EXTENSION - LH MULTI-LOC -- $ 795.00
36 in /40 in PUNCH GAUGING EXTENSION - RH MULTI-LOC -- $ 795.00
85 in /90 in PUNCH GAUGING EXTENSION - LH MULTI-LOC -- $1,495.00
85 in /90 in PUNCH GAUGING EXTENSION - RH MULTI-LOC -- $1,495.00
TOOL TABLE EXTENSION W/ PUNCH & DIE DRAWER (100 LBS MAX) ---------------------------- $ 795.00
48 in DELUXE BACK GAUGE --------------------------- $ 695.00
48 in ELECTRIC BACK GAUGE (SHEAR STATION ONLY) ---- $2,350.00
INFEED CONVEYOR (24 in X 5 ft W/SUPPORT ARMS) ------- $2,895.00
12 in BRAKE W/2 in V DIES FOR 1/4 in MATERIAL --------- $2,150.00
24 in BRAKE W/2 in V DIES FOR 1/4 in MATERIAL --------- $2,895.00
12 in BRAKE TABLE W/SCALE & SQUARING ARM ---------- $425.00
24 in BRAKE TABLE W/SCALE & SQUARING ARM ---------- $495.00
BRAKE LENGTH GAUGE W/SCALE ---------------------- $200.00
OPEN END BRAKE (MAX 1/4 in X5 in FLAT OR ANGLE IRON) - $1,625.00
PIPE NOTCHER HOUSING (SEPARATE DIES FOR EACH SIZE) $315.00
3/4 in SCHEDULE 40 PIPE DIE SET ------------------- $ 620.00
1 in SCHEDULE 40 PIPE DIE SET --------------------- $ 620.00
1-1/4 in SCHEDULE 40 PIPE DIE SET ----------------- $ 645.00
1-1/2 in SCHEDULE 40 PIPE DIE SET ----------------- $ 645.00
2 in SCHEDULE 40 PIPE DIE SET --------------------- $ 675.00
PUNCH PUSHER FOR PIPE NOTCHER ------------------- $ 185.00
TOOL TABLE PUSHER FOR PIPE NOTCHER -------------- $ 155.00
90 DEGREE V NOTCHER (6 in X6 in X5/16 in ) --------------- $2,975.00
CHANNEL SHEAR (2 in TO 6 in ADJUSTABLE) ------------- $4,295.00
ROD SHEAR (UP TO 1-1/4 in ROUND OR 1 in SQUARE) ----- $2,295.00
SQUARE TUBE SHEAR (1/2 in TO 2 in -12 GA. MAX) ------- $1,525.00
PICKET TOOL HOUSING (SEPARATE DIES FOR EACH SIZE) $1,095.00
1/2 in UPPER & LOWER DIES (14 GA. MAX) ------------ $ 395.00
3/4 in UPPER & LOWER DIES (14 GA. MAX) ------------ $ 395.00
1 in UPPER & LOWER DIES (14 GA. MAX) -------------- $ 395.00
#45 RETAINING NUT(PUNCHING FROM 1-9/32 in TO 1-9/16 in )$ 90.00
HEAVY DUTY RETAINING NUT (PUNCHING FROM 1-19/32 in TO 4 in ) ------------------------------------------ $ 395.00
WRENCH FOR HEAVY DUTY RETAINING NUT ------------- $ 50.00
DIE INSERT FOR 2 1/2 in OD DIES ------------------- $ 175.00
DIE INSERT FOR 3 in OD DIES ----------------------- $ 175.00
DIE HOLDER FOR 6 in X 6 in DIES --------------------- $ 650.00
OFFSET DIE HOLDER FOR FLANGE PUNCHING ----------- $ 725.00
URETHANE PUNCH STRIPPER - #40 STANDARD PUNCHES ONLY (MAXIMUM SIZES:  3/4" ROUND, 3/4" OVAL, 11/16" SQUARE & 3/4" HEX) $75.00
URETHANE STRIPPER ASSEMBLY ---------------------- $2,795.00
66 DEGREE ANGLE BLADE(4 in X3-1/2 in 3-1/2 in X3 in ,3 in X2-1/2 in )$495.00
70 DEGREE ANGLE BLADE(4 in X3 in ,2-1/2 in X2 in ,2 in X1-1/2 in )- $ 495.00
74 DEGREE ANGLE BLADE(6 in X4 in ,5 in X3-1/2 in ,3 in X2 in ) ---- $ 495.00
80 DEGREE ANGLE BLADE(6 in X 3-1/2 in , 5 in X 3 in ) ----- $ 495.00
UPPER ANGLE BLADE QUICK CHANGE HARDWARE --------- $ 395.00
ANGLE SHEAR (6 in X6 in X1/2 in ) WHEN ORDERED SEPARATELY- $2,125.00
ANGLE IRON MITER GUIDE(45 & 22 DEGREES) --------- $ 70.00
WELD COUPON BENDER - 9012, 12012, DO70 & DO95 (MAX 3/8"X2"X7") $1,825.00ECONOMY #40 PUNCH & #82 DIE PACKAGE (16TH) INCLUDES:  12SET OF ROUND PUNCHES & DIES:  5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1. ------------ $ 350.00
ECONOMY #40 PUNCH & #82 DIE PACKAGE (32ND) INCLUDES:  12SET OF ROUND PUNCHES & DIES:  11/32, 15/32, 17/32, 19/32, 21/32, 23/32, 25/32, 27/32, 29/32, 31/32, 1-1/32, 1-3/16. $350.00
ECONOMY #40 PUNCH & #82 DIE PACKAGE (METRIC) INCLUDES:  12 SETS OF ROUND, METRIC PUNCHES AND DIES:  8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 30, & 32. $350.00
DELUXE #40 PUNCH & #82 DIE PACKAGE INCLUDES: ROUNDS:  1/4, 9/32, 5/16, 3/8, 13/32, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4; SQUARES: 1/2, 3/4, 7/8; AND OVALS:  9/32 X 3/4, 5/16 X 3/4, 9/32 X 1, 5/16 X 1, 13/32 X 1, 7/16 X 1, 17/32 X 1, 9/16 X 1, 9/16 X 1-1/4, 11/16 X 1-1/4, 13/16 X 1-1/4. ------------- $1,150.00
12" BRAKE PACKAGE: 12" BRAKE, BRAKE LENGTH GAUGE W/SCALE, & 12" BRAKE TABLE W/SCALE & SQUARING ARM. $2,325.00
24" BRAKE PACKAGE: 24" BRAKE, BRAKE LENGTH GAUGE W/SCALE, & 24" BRAKE TABLE W/SCALE & SQUARING ARM. $3,075.00
PIPE NOTCHER PACKAGE: HOUSING, 1-1/4" SCH. 40 PIPE DIES, 1-1/2" SCH. 40 PIPE DIES, TOOL TABLE PUSHER, & PUNCH PUSHER. $1,395.00
CHANNEL SHEAR PACKAGE: CHANNEL SHEAR (2" TO 6" ADJUSTABLE), & OFFSET DIE HOLDER. $4,695.00
PRODUCTIVITY PACKAGE: INFEED CONVEYOR (24" X 5' W/SUPPORT ARMS), LASER LIGHT FOR BAR SHEAR, LED LIGHT PACKAGE, PUNCH TABLE EXTENSION, TOOL TABLE EXTENSION W/ PUNCH & DIE DRAWER, & 48" DELUXE BACK GAUGE. $5,150.00
PRODUCTIVITY PACKAGE: INFEED CONVEYOR (24" X 5' W/SUPPORT ARMS), LASER LIGHT FOR BAR SHEAR, LED LIGHT PACKAGE, PUNCH TABLE EXTENSION, TOOL TABLE EXTENSION W/ PUNCH & DIE DRAWER, & 48" ELECTRIC BACK GAUGE. $6,550.00
DELIVERY:
SUBJECT TO STOCK