(1) NEW SCOTCHMAN IRONWORKER, MODEL #: DO 70/110-24M

Brand
SCOTCHMAN

Model
DO 70/110-24M

Stock #
84852

Condition
New

Year
N/A

Equipped With

SPECIFICATIONS:
RATED ON: 65,000 PSI TENSILE A 36 MILD STEEL PUNCHING CAPACITY --------------- 70 TON, 1-1/8 in IN 3/4 in
SPECIAL TOOLING ----------------- 4 in MAX. DIA.
THROAT DEPTH -------------------- 9 in
FLAT BAR SHEAR ------------------ 110 TON
(SABRE BLADE - STD) ------------- 24 in LENGTH
                                                       1 in X 6 in
                                                       3/8 in X 24 in
ANGLE SHEAR 90?? ----------------- 6 in X 6 in X 1/2 in
ANGLE SHEAR 45?? ----------------- 3 in X 3 in X 3/8 in
(WITH BAR SHEAR) ---------------- 4 in X 4 in X 1/2 in
BRAKE 12 in ----------------------- 65 TON
BRAKE 24 in ----------------------- 45 TON
OPEN END BRAKE ------------------ MAX. 1/4 in X 6 in
FLAT OR ANGLE IRON PIPE NOTCHER -------------------- 3/4 in
SCHEDULE 40 I.D. ---------------- 1 in
                                                      1-1/4 in
                                                      1-1/2 in
                                                      2 in
90° V. NOTCHER ------------------ 6 in X 6 in X 5/16 in
RECTANGLE NOTCHER --------------- 3 in X 5 in X 3/8 in
                                                            3 in X 4 in X 1/2 in
V. NOTCH ------------------------ 3 in X 3 in X 3/8 in
NOTCHING IN LEG OF -------------- 6 in TO 10 in
CHANNEL SHEAR ------------------- 2 in TO 6 in ADJ.
ROUND ROD (MAX.) ---------------- 1/4 in TO 1-1/4 in , 9 CAV.
SQUARE ROD (MAX.) --------------- 1/4 in TO 1 in , 1 CAV.
SQUARE TUBE SHEAR --------------- 1/2 in TO 2 in , 12 GAUGE
OFFSET DIE HOLDER --------------- MAX. 40 TON
STROKES/MIN IN LIGHT MATERIAL --- 1/4 in STROKE [PUNCH STATION]
STROKES/MIN IN HEAVY MATERIAL --- 3/4 in STROKE [PUNCH STATION]
HYDRAULICS ---------------------- 3,000/3,000 PSI
MOTORS STANDARD ----------------- 10 HP, 3 PH, 230/460 V
MOTORS OPTIONAL ----------------- 10 HP, 1 PH, 230 V
DIMENSIONS ---------------------- 30 in X 65 in X 72-1/8 in
SHIPPING WEIGHT ----------------- 3,800 LBS.
FEATURES:
DUAL OPERATOR ALLOWS FOR TWO OPERATORS TO WORK AT THE SAME TIME AT FULL CAPACITY
KEYED PUNCH RAM FOR SAFETY
PUNCH GAUGING TABLE WITH FENCE AND SCALE
DIE HOLDER COMPLETE WITH 2 in DIE INSERT
PUNCH NUT WITH WRENCH & STRIPPER
ADJUSTABLE SWING-AWAY STRIPPER
ONE ROUND PUNCH & DIE: MAX. DIA. 1-1/4 in
PUNCH JOG CONTROL
TWO ADJUSTABLE ELECTRIC STROKE CONTROLS WITH SCALE
TWO ELECTRIC REMOTE FOOT PEDALS
TWO 2-STAGE HYDRAULIC PUMPS
TWO VALVES
NOTCHER TABLE WITH GUIDES
SHEAR TABLE WITH MITER FENCE
TOOL TABLE WORK AREA
SLUG RECEPTACLES
ELECTRICAL BOX SUPPLIED WITH EMERGENCY PALM BUTTON AND
LOCK-OUT TAG-OUT ACCOMMODATIONS
230/460 VOLT/3 PHASE ELECTRICS (MUST SPECIFY VOLTAGE)
ALL GUARDS NECESSARY TO COMPLY WITH ANSI B 11-5 STANDARDS
FORKLIFT ACCOMMODATIONS
NOTES:
SPECIFICATIONS SUBJECT TO VERIFICATION
OPTIONAL FEATURES:
SINGLE PHASE MOTOR, 10 HP 220 VOLT/ 60 HZ -------- $1,300.00
ECONOMY #40 PUNCH & #82 DIE PACKAGE (INCLUDES: 12 SET OF ROUND PUNCHES & DIES: 11/32, 15/32, 17/32, 19/32, 21/32, 23/32,25/32,27/32,29/32,31/32,1-1/32,1-3/16.) ---- $ 350.00
PIPE NOTCHER HOUSING (SEPARATE DIES REQUIRED FOR EACH SIZE) --------------------------------------- $ 295.00
2 in SCHEDULE 40 PIPE UPPER & LOWER DIES SET ----- $ 675.00
TOOL TABLE PUSHER FOR PIPE NOTCHER --------------- $ 155.00
SPECIAL - 2 1/2 in SCH 40 PIPE DIES ---------------- $1,915.00
SPECIAL - HOUSING FOR ABOVE DIES ----------------- $1,785.00
L.E.D. LIGHT PACKAGE-XL/DO(FACTORY INSTALLATION) - $ 450.00
LASER LIGHT - BAR SHEAR (FACTORY INSTALLATION) --- $1,075.00
PUNCH EXTENSION TABLE ---------------------------- $ 295.00
36 in PUNCH GAUGING EXTENSION LH ----------------- $ 795.00
36 in PUNCH GAUGING EXTENSION RH ----------------- $ 795.00
85 in PUNCH GAUGING EXTENSION LH ----------------- $1,495.00
85 in PUNCH GAUGING EXTENSION RH ----------------- $1,495.00
TOOL TABLE EXTENSION W/ PUNCH & DIE DRAWER (100 LBS. MAX) --------------------------------------------- $ 695.00
48 in DELUXE BACK GAUGE ---------------------------- $ 695.00
48 in ELECTRIC BACK GAUGE - SHEAR STATION ONLY ----- $2,095.00
INFEED CONVEYOR (24 in X 5 FOOT W / SUPPORT ARMS) -- $2,695.00
12 in BRAKE (WITH 2 in V OPENING DIES STANDARD - FOR 1/4 in MATERIAL) ---------------------------------------- $1,995.00
24 in BRAKE (WITH 2 in V OPENING DIES STANDARD - FOR 1/4 in MATERIAL) ---------------------------------------- $2,695.00
12 in BRAKE TABLE WITH SCALE & SQUARING ARM -------- $ 395.00
24 in BRAKE TABLE WITH SCALE & SQUARING ARM -------- $ 445.00
BRAKE LENGTH GAUGE WITH SCALE -------------------- $ 185.00
OPEN END BRAKE (MAX 1/4 in X 5 in FLAT OR 1/4 in X 5 in ANGLE IRON) -------------------------------------- $1,625.0
3/4 in SCHEDULE 40 PIPE UPPER & LOWER DIES SET --- $ 620.00
1 in SCHEDULE 40 PIPE UPPER & LOWER DIES SET ----- $ 620.00
1-1/4 in SCHEDULE 40 PIPE UPPER & LOWER DIES SET - $ 645.00
1-1/2 in SCHEDULE 40 PIPE UPPER & LOWER DIES SET - $ 645.00
PUNCH PUSHER ASSY. ------------------------------- $ 185.00
90 DEGREE V-NOTCHER (6 in X 6 in X 5/16 in - MUST SPECIFY WORK STATION) ----------------------------------------- $2,495.00
CHANNEL SHEAR (2 in TO 6 in ADJUSTABLE) -------------- $4,695.00
ROD SHEAR (UP TO 1 in SQUARE OR 1-1/4 in ROUND) ------ $2,195.00
SQUARE TUBE SHEAR (1/2 in TO 2 in ?? 14 GAUGE MAX) ---- $1,395.00
PICKET TOOL HOUSING* (SEPARATE DIES REQUIRED FOR EACH SIZE)
(*MOUNTS IN THE PUNCH STATION ONLY) -------------- $1,075.00
1/2 in 14 GAUGE MAX.UPPER & LOWER DIES ------------- $ 395.00
3/4 in 14 GAUGE MAX. UPPER & LOWER DIES ------------ $ 395.00
1 in 14 GAUGE MAX. UPPER & LOWER DIES -------------- $ 395.00
#45 RETAINING NUT(PUNCHING FROM 1-9/32 in -1-9/16 in ) - $ 90.00
HEAVY DUTY RETAINING NUT (OVERSIZED PUNCHING FROM 1-19/32 in TO 4 in ) ------------------------------------------- $ 395.00
WRENCH FOR HEAVY DUTY RETAINING NUT -------------- $ 50.00
DIE INSERT FOR 2-1/2 in O.D. DIES ------------------ $ 175.00
DIE INSERT FOR 3 in O.D. DIES ---------------------- $ 175.00
DIE HOLDER FOR 6 in X 6 inch DIES ---------------------- $ 580.00
OFFSET DIE HOLDER FOR FLANGE PUNCHING (2 in O.D. DIES ONLY MAXIMUM 40 TON) ---------------------------------- $ 725.00
URETHANE PUNCH STRIPPER - #40 STANDARD PUNCHES ONLY (MAXIMUM SIZES: 3/4 in ROUND, 3/4 in OVAL, 11/16 in SQUARE & 3/4 in HEX) ----- $ 75.00
URETHANE STRIPPER ASSEMBLY ----------------------- $2,475.00
UNEQUAL LEG ANGLE SHEAR BLADE 66 DEGREE - (4 in X 3-1/2 in , 3-1/2 in X 3 in , 3 in X 2-1/2 in ) ------------------------ $ 495.00
UNEQUAL LEG ANGLE SHEAR BLADE 70 DEGREE - (4 in X 3 in , 2-1/2 in X 2 in , 2 in X 1-1/2 in ) -------------------------- $ 495.00
UNEQUAL LEG ANGLE SHEAR BLADE 74 DEGREE - (6 in X 4 in , 5 in X 3-1/2 in , 3 in X 2 in ) --------------------------------- $ 495.00
UNEQUAL LEG ANGLE SHEAR BLADE 80 DEGREE - (6 in X 3-1/2 in , 5 in X 3 in ) ----------------------------------------- $ 495.00
UPPER ANGLE BLADE QUICK CHANGE HARDWARE ---------- $ 340.00
ANGLE SHEAR (6 in X 6 in X 1/2 in ) --------------------- $1,925.00
ANGLE IRON MITER GUIDE --------------------------- $ 70.00
WELD COUPON BENDER - 9012, 12012, DO70 & DO95 (MAX 3/8 in X 2 in X 7 in ) ------------------------------------------ $1,795.00
DELUXE #40 PUNCH & #82 DIE PACKAGE (INCLUDES: ROUNDS: 1/4, 9/32, 5/16, 3/8, 13/32, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4 - SQUARES: 1/2, 3/4, 7/8 - AND OVALS: 9/32 X 3/4, 5/16 X 3/4, 9/32 X 1, 5/16 X 1, 13/32 X 1, 7/16 X 1, 17/32 X 1, 9/16 X 1, 9/16 X 1-1/4, 11/16 X 1-1/4, 13/16 X 1-1/4.) -- $1,150.00
12 in BRAKE PACKAGE (12 in BRAKE, BRAKE LENGTH GAUGE W/SCALE, & 12 in BRAKE TABLE W/SCALE & SQUARING ARM.) --------- $2,175.00
24 in BRAKE PACKAGE (24 in BRAKE, BRAKE LENGTH GAUGE W/SCALE, & 24 in BRAKE TABLE W/SCALE & SQUARING ARM.) --------- $2,850.00
PIPE NOTCHER PACKAGE (HOUSING, 1-1/4 in SCH. 40 PIPE DIES, 1-1/2 in SCH. 40 PIPE DIES, TOOL TABLE PUSHER, & PUNCH PUSHER.) ----------- $1,395.00
CHANNEL SHEAR PACKAGE (CHANNEL SHEAR (2 in TO 6 in ADJUSTABLE), & OFFSET DIE HOLDER.) ---------------------------- $4,595.00
PRODUCTIVITY PACKAGE (INFEED CONVEYOR (24 in X 5 ft W/SUPPORT ARMS), LASER LIGHT FOR BAR SHEAR, LED LIGHT PACKAGE, PUNCH TABLE EXTENSION, TOOL TABLE EXTENSION W/ PUNCH & DIE DRAWER, & 48 in DELUXE BACK GAUGE.) --------------- $4,795.00
PRODUCTIVITY PACKAGE (INFEED CONVEYOR (24 in X 5 ft W/SUPPORT ARMS), LASER LIGHT FOR BAR SHEAR, LED LIGHT PACKAGE, PUNCH TABLE EXTENSION, TOOL TABLE EXTENSION W/ PUNCH & DIE DRAWER, & 48 in ELECTRIC BACK GAUGE.) -------------- $5,895.00 DELIVERY: SUBJECT TO STOCK

Not Quite What You're Looking For?

Our knowledgeable staff will assist you with all of you questions.

Contact Us