(1) NEW STANDARD HYDRAULIC PRESS BRAKE, MODEL #: AB250-12

Brand
STANDARD

Model
AB250-12

Stock #
81970

Condition
Not specified

Year
N/A

Equipped With

SPECIFICATIONS: FORMING/PUNCHING TONNAGE ---------- 250/175
BED/RAM OVERALL ------------------- 12 ft
BETWEEN HOUSING ------------------- 10 ft5 in
OPEN HEIGHT ----------------------- 16 in
STROKE ---------------------------- 8 in
CLOSED HEIGHT --------------------- 8 in
BELOW GRADE ----------------------- NO
THROAT DEPTH ---------------------- 10 in
BED WIDTH ------------------------- 8 in
BED HEIGHT ------------------------ 38 in
WEIGHT ---------------------------- 36,000 LBS
HEIGHT ABOVE FLOOR ---------------- 128 in
HORSEPOWER ------------------------ 20 HP.
RAM SPEEDS (APPROACH) ------------- 102 IPM
(PRESS) ------------- 16 IPM
(RETURN) ------------- 132 IPM OPTIONAL FEATURES: SAFETY

LIGHT CURTAIN WITH FOOTSWITCH
FLOATING BLANK KEY-SWITCH INCLUDED, SOME PROGRAMMABILITY.
SIDE BARRIERS INCLUDED TO COMPLETELY PROTECT THROAT AREA OF
MACHINE. 1 YEAR WARRANTY. $6,500.00
OTHER BRANDS OF LIGHT CURTAINS AVAILABLE AT SPECIAL REQUEST

LASER GUARDING SYSTEMS
WRAPS LASERS AROUND PUNCH TO ALLOW OPERATOR CLOSER TO
PINCH-POINT AND STILL BE O.S.H.A. APPROVED. 1 YEAR
WARRANTY. $15,800.00
(LASER GUARD SYSTEM NOT RECOMMENDED FOR PUNCHING/BOTTOMING
APPLICATIONS OR APPLICATIONS WITH MANY DIE CHANGES)

COMPLIANCE OPTIONS INCLUDING UL LISTING, CSA, ZED
AS STANDARD ALL COMPONENTS ARE U.L. LISTED BUT THE SYSTEM
AS A WHOLE IS NOT U.L. COMPLIANT. FOR U.L. COMPLIANT
ACHINE $2,500.00
NOTE! THIS PRICE DOES NOT INCLUDE U.L. OFFICER SIGN OFF AT
DESTINATION??THAT IS THE RESPONSIBILITY OF THE CUSTOMER
FOR OTHER LISTINGS PRICE PER QUOTE

ADDITIONAL FOOTSWITCH AND PEDESTAL CONTROL $2,100.00
FOR MULTIPLE OPERATORS

LOW SPEED RETRACT
RAM RETURNS IN SLOW PRESS SPEED FOR HANDLING OF LARGE WORK
PIECES. $600.00

SAFETY GUARDING FOR REAR OF PRESS BRAKE $5,500.00
UP TO 14??. COMES WITH SWINGING GATES AND INTERLOCKING
SYSTEM FOR SHUT DOWN WHILE OPEN. CUSTOM GUARDING SYSTEMS
AVAILABLE.

OPERATIONAL PREFERENCE CONTROLS


AUTO RETURN OF RAM
NORMAL OPERATION OF RAM REQUIRES OPERATOR TO RELEASE
FOOTSWITCH TO ALLOW RAM TO RETURN TO UPPER LIMIT. THIS
OPTION MAKES THE RAM RETURN AUTOMATICALLY EVEN IF
FOOTSWITCH IS STILL DEPRESSED. $700.00


DECOMPRESSION SYSTEM
REQUIRED FOR BOTTOMING APPLICATIONS??ALLOWS OIL PRESSURE TO
BLEED OFF TO REDUCE SHOCK TO HYDRAULIC SYSTEM.
$900.00


LUBRICATION SYSTEM

AUTOMATIC LUBRICATION SYSTEM (AIR POWER REQUIRED)
AUTOMATICALLY PUMPS EP-1 GREASE THROUGH LUBRICATION SYSTEM
VIA A TIMED SYSTEM. ALSO INCLUDES FLOW ADJUSTABLE
INJECTORS. INCLUDES AUTO-SHUTOFF WITH WARNING LIGHT WHEN
RESERVOIR IS EMPTY. $4,700.00

EXTENDED WARRANTY SERVICE


THIS PACKAGE INCLUDES:
* A 7 YEAR PARTS IN LIEU OF STANDARD 5 YEAR PARTS WARRANTY
* A 1 YEAR PLC AND CNC WARRANTY
* A 5 YEAR ONSITE LIMITED LABOR WARRANTY

100 TON THROUGH 400 TON PRESS BRAKE $5,200.00



PAINT COLOR

BLUE IS STANDARD ON ALL MACHINES??CHARCOAL IS AVAILABLE AT
NO CHARGE BUT MUST BE REQUESTED.
SPECIAL PAINT COLOR (SINGLE COLOR INDUSTRIAL ENAMEL ONLY)
A SAMPLE IS REQUIRED $700.00


SUPPORT ARMS AND ACCESSORIES

NOTE! ALL BRAKES COME STANDARD WITH (2) 24 in BASIC WORK
SUPPORTS. T-SLOT SUPPORT ARMS HAVE PRECISION T-SLOT BARS
ADDED TO SET GRAVITY STOPS.

T-SLOT SUPPORT ARMS
24 inch T-SLOT SUPPORT ARM $450.00 (EA.)
36 inch T-SLOT SUPPORT ARM $800.00 (EA.)
48 inch T-SLOT SUPPORT ARM $1,000.00(EA.)
FOR IMBEDDED SCALES IN ARMS ADD $150.00
GRAVITY STOP FOR T-SLOT SUPPORT ARM $350.00 (EA.)

5/8 inch T-SLOT ACROSS FRONT EDGE OF BED
ALLOWS LEFT TO RIGHT MOVEMENT OF T-SLOT SUPPORT ARMS
INCLUDED

CNC SHEET ASSIST/ FOLLOWER
HEAVY DUTY SHEET FOLLOWER TO RAISE UP AND DOWN WITH WORK
PIECE CONTROLLED THROUGH 640 CONTROL (OPTIONAL). HANDLES
UP TO 400 LBS. $39,900.00
PARKING OPTION $3,900.00




QUICK-RELEASE LINEAR WORK SUPPORT SYSTEM

QUICK-CHANGE, QUICK-DISCONNECT STYLE SUPPORT ARMS WITH
HEAVY DUTY, SMOOTH TRANSITION ROLLER GUIDES FOR EASY ARM
MOVEMENT. MULTIPLE ADJUSTMENT POINTS ON ARMS FOR SUPER
PRECISION PLACEMENT.
SPECIAL SLOT/MACHINED SURFACE REQUIRED FOR $2,900.00
(FOR 10??-14?? PRESS BRAKES)
(2) 24 inch ARM SYSTEM $5,900.00
(2) 36 inch ARM SYSTEM $7,100.00


SIMPLE GO-TO BACKGAUGE AND RAM CONTROL
NOTE! THE FOUR POSITION IN-LINE DEPTH STOP AND THE GO-TO
BACKGAUGE CAN BE BOUGHT SEPARATELY BUT THEY WORK VERY WELL
TOGETHER AS A LOW COST MANUAL X Y AXIS CONTROL
Y AXIS ONLY RAM CONTROL

FOUR POSITION IN-LINE DEPTH STOP MECHANICAL RAM CONTROL
MANUAL RAM CONTROL THAT ALLOWS OPERATOR TO PRE-SET UP TO 4
DIFFERENT RAM DEPTHS/ANGLES BY ADJUSTING MECHANICAL LIMITS
ON THE SIDE OF THE BRAKE. THE OPERATOR CAN CHOOSE FROM ANY
OF THE 4 POSITIONS FROM A SELECTOR SWITCH LOCATED ON THE 2
HAND CONTROL PEDESTAL OUT IN FRONT OF MACHINE.
$1,800.00

SIMPLE GO-TO X AXIS ONLY BACKGAUGE
X AXIS 24 inch TRAVEL DUAL DRIVE GO-TO POWER BACKGAUGE
$12,800.00
FOR UP TO AB400-14



SIMPLE 2-3 X AXIS CNC SUPER BASIC CONTROL
NOTE! THE AUTOMEC 300 CONTROL IS SPECIFICALLY FOR USERS
WHO WANT THE MOST BASIC X, Y AND R PROGRAMMING AVAILABLE.

AUTOMEC 300 SERIES CONTROL WITH 24 inch OF GAUGE TRAVEL
* 300 PROGRAMS
* 11 DIGIT PART NUMBERS
* RAM DEPTH MODE BEND ALLOWANCE
* TEACH MODE
* RAM ANGLE MODE
* TOOLING LIBRARY
* GAUGE RETRACT/DELAY
* AUTO RAM REFERENCE
* ONSITE TRAINING FOR AUTOMEC CONTROL

CNC300/G24HD 2 AXIS AB100-14 THRU AB400-14 $21,300.00


R AXIS ADD $5,200.00
48 inch TRAVEL ADD $10,300.00

NOTE: STANDARD MECHANICAL RAM LIMIT SWITCHES ARE INCLUDED
AS BACK-UP.

630 CONTROL WITH TOOLING GRAPHICS 1-4 AXIS
AVAILABLE UP TO Y X R CNC CROWNING
* EASY TO USE BUT EXTREMELY VERSATILE CONTROL WITH ON-
SCREEN 2D TOOLING GRAPHICS
* 10 in COLOR TOUCHSCREEN MOUNTED ON PENDANT
* 2D GRAPHICAL OFFLINE SOFTWARE FOR DESKTOP PROGRAMMING
AVAILABLE OPTIONALLY
* AVAILABLE WITH X/ Y/ R AND CNC CROWNING AXIS
PROGRAMMABILITY (CROWNING OPTIONAL)
* THOUSANDS OF HARD DRIVE JOB STORAGE PLUS UNLIMITED JOB
STORAGE VIA USB PORT RS232 PORT ETHERNET
* EXTENSIVE TOOLING LIBRARY
* READILY ACCEPTS MOST TOOLING FILES
* PROGRAMMABLE DELAY AND RETRACT AT PINCH POINT
* INCH/MM CONVERSION
* 29 inch OF X AXIS GAUGE TRAVEL (OPTIONAL 39 inch)
* 8 inch ADJUSTABLE MANUAL R OR OPTIONAL POWER R
* AUTO RETURN OF RAM INCLUDED
* LOW SPEED RETRACT INCLUDED
* DWELL/DECOMPRESSION INCLUDED
* ONE DAY ONSITE TRAINING IN CONTIGUOUS U.S.

630 W/Y AXIS CONTROL ONLY (NO BACKGAUGE) $7,900.00
630 X/Y AXIS 24 inch GAUGE TRAVEL $23,500.00



PROGRAMMABLE CNC RAM TILT ALLOWS YOU TO PROGRAM THE DESIRED
RAM TILT WITHIN THE PROGRAMMABLE JOBS OF THE CNC.
$3,500.00



2D OFF-LINE PROGRAMMING SOFTWARE $900.00
R AXIS ADD $5,500.00
39 inch OF GAUGE TRAVEL IN LIEU OF 24 inch $7,900.00
PROGRAMMABLE TONNAGE $700.00
ADDITIONAL FINGER $1,900.00
RADAN 3D DXF/DWG FILE TRANSFER CAPABILITY CONTACT FOR QUOTE


NOTE: MECHANICAL RAM LIMIT SWITCHES ARE NOT INCLUDED WITH
630 OR 640 UNITS

640 FULL 2D GRAPHICAL CONTROL 1-6 AXIS
AVAILABLE UP TO Y X R Z1-Z2 CNC CROWNING

* FULLY 2D GRAPHICAL CONTROL WITH TOUCHSCREEN
* AUTO RETURN OF RAM INCLUDED
* 15 inch COLOR SCREEN ON PENDANT
* 3D ON SCREEN PART VIEWING
* CROWNING CORRECTION IN DEGREES
* 2D IDENTIFICATION OF BEST BENDING SEQUENCES
* 2D GRAPHICAL OFFLINE SOFTWARE FOR DESKTOP PROGRAMMING
* 2D COLLISION DETECTION
* UNLIMITED JOB STORAGE VIA USB & RS232 PORTS ETHERNET
* X, Y, R, Z1-Z2 PROGRAMMABILITY
* READILY ACCEPTS MOST TOOLING FILES
* 30,000 HARD DRIVE PROGRAMS
* PROGRAMMABLE DELAY & RETRACT AT PINCH POINT
* INCH/MM CONVERSION
* LOW SPEED RETRACT INCLUDED
* DWELL/DECOMPRESSION INCLUDED
* 2 DAY ONSITE TRAINING AT CUSTOMER ftS FACILITY

640 W/ 2D GRAPHICS WITH X AND Y AXES
$27,900.00


PROGRAMMABLE CNC RAM TILT ALLOWS YOU TO PROGRAM THE DESIRED
RAM TILT WITHIN THE PROGRAMMABLE JOBS OF THE CNC.
$3,500.00


R AXIS ADD $5,500.00
Z1-Z2 AXIS $9,900.00 (MUST HAVE R AXIS)
39 inch OF GAUGE TRAVEL IN LIEU OF 24 inch $7,900.00
PROGRAMMABLE TONNAGE $700.00
2D GRAPHICAL OFF-LINE SOFTWARE INCLUDED
ADDITIONAL FINGER $1,900.00
RADAN 3D DXF/DWG FILE TRANSFER CAPABILITY CONTACT FOR QUOTE
660PC 3D CNC CONTROL QUOTE AVAILABLE UPON REQUEST

TOOLING

NOTE! NO DIES OR DIE HOLDERS ARE INCLUDED AS STANDARD??ALL
DIES MUST BE ORDERED OPTIONALLY
NOTE: THE CUSTOMER HAS FULL RESPONSIBILITY FOR HOW WELL DIE
SETS WORK FOR THEIR APPLICATIONS. PLEASE REVIEW PRESS
BRAKE OPEN HEIGHT & STROKE AND TOOLING STACK HEIGHTS TO
INSURE PROPER DIE PENETRATION!

DIES QUOTED BELOW ARE SUBJECT TO 1 YEAR DIE MANUFACTURER??S
WARRANTY.

FLAME HARDENING IS OPTIONAL??CONTACT FOR QUOTE

FOUR WAY DIE SETS
#225 TOOLING PACKAGE FOR 18 GAUGE UP TO 3/16 inch PL.
(1) 2 inch NET HEIGHT DIE HOLDER
(1) 3.75 inch LONG X 1 1/8 inch WIDE, 85 DEGREE PUNCH WITH 3/64 inch
RADIUS
(1) 2.25 inch SQUARE DIE BLOCK WITH 1/2 inch, 3/4 inch, 1 inch, AND 1 1/2 inch
V DIE OPENINGS AT 85 DEGREES.
7.5 inch STACK HEIGHT??NOTE: CONSIDER DIE PENETRATION

10?? IN LENGTH $6,000.00
12?? IN LENGTH $6,600.00
14?? IN LENGTH $7,300.00

#325 TOOLING PACKAGE FOR 12 GAUGE UP TO ?? inch PLATE
(1) 2 inch NET HEIGHT DIE HOLDER
(1) 3 3/4 inch LONG X 1 1/2 inch WIDE. 85 DEGREE PUNCH WITH 3/64 inch
RADIUS
(1) 3 1/4 inch SQUARE DIE BLOCK WITH 3/4 inch, 1 inch, 1 1/2 inch AND 2 inch V
DIE OPENINGS AT 85 DEGREES.
9 inch STACK HEIGHT??NOTE: CONSIDER DIE PENETRATION
10?? IN LENGTH $7,200.00
12?? IN LENGTH $8,000.00
14?? IN LENGTH $8,900.00

#475 TOOLING PACKAGE FOR 10 GAUGE UP TO 3/8 inch PLATE
(1) 2 1/2 inch NET HEIGHT DIE HOLDER
(1) 3 1/4 inch LONG X 2 inch WIDE, 85 DEGREE PUNCH WITH 1/8 inch RADIUS
(1) 4 3/4 inch SQUARE DIE BLOCK WITH 1 inch, 1 1/2 inch, 2 1/2 inch AND 3 inch
WIDE V DIE OPENINGS AT 85 DEGREES.
TOTAL OF 10.5 inch STACK HEIGHT

12?? IN LENGTH $10,600.00
14?? IN LENGTH $11,400.00

#575 TOOLING PACKAGE FOR 10 GAUGE UP TO ?? inch PLATE
(1) 2 1/2 inchNET HEIGHT DIE HOLDER
(1) 3 3/4 inch LONG X 1 1/2 inch WIDE, 85 DEGREE PUNCH WITH 1/8 inch
RADIUS
(1) 2 3/4 LONG X 2 1/2 inch WIDE, 85 DEGREE PUNCH WITH 1/4 inch
RADIUS
(1) 5.75 inch SQUARE DIE BLOCK WITH 1 inch, 2 inch, 3 inch AND 5 inch V DIE
OPENINGS AT 85 DEGREES. TOTAL OF 12 inch STACK HEIGHT W/TALL
PUNCH AND 11 in STACK HEIGHT WITH SHORT PUNCH

12?? IN LENGTH $16,200.00
14?? IN LENGTH $18,100.00

DIE HOLDERS/SPACERS FOR AMERICAN STYLE TOOLING??NOT REQUIRED
FOR 4 WAY DIE SETS
3 inch X 3 inch X 10?? $2,500.00
3 inch X 3 inch X 12?? $2,800.00
3 inch X 3 inch X 14?? $3,100.00
CONTACT FACTORY FOR OTHER SIZE DIE HOLDERS AND ALL OTHER
TOOLING REQUIREMENTS


WILA CROWNING AND CLAMPING SYSTEMS

NOTE: CROWNING IS RARELY NEEDED FOR THE AB DUE TO THE FULL
TONNAGE CAPABILITY THE ENTIRE LENGTH OF THE BED BUT CERTAIN
APPLICATIONS CAN BENEFIT FROM A CROWNING UNIT. CONTACT THE
FACTORY FOR MORE INFORMATION.

MANUAL AND CNC CROWNING UNITS USED FOR FINE TUNING FORMING
APPLICATIONS. WHEN USING WITH 4 WAY DIE SETS ADD $800.00
FOR CLAMPS TO HOLD FOUR WAY DIE BLOCKS FROM 2.25 inch UP TO
4.25 inch. LARGER FOUR WAY DIE SETS WILL REQUIRE E-WIDE OR
LARGER CROWNING UNIT.
WILA CROWNING

FOR DIES UP TO 3.5 inch WIDE

MANUAL CNC AUTOCROWN CNC AUTOCROWN
W/HYD. BED CLAMPING

10?? $14,000.00 $17,600.00 $23,500.00
12?? $15,200.00 $18,900.00 $26,000.00
14?? $17,200.00 $20,800.00 $28,700.00


E-WIDE CROWNING FOR DIES UP TO 6 inch WIDE

MANUAL CNC AUTOCROWN CNC AUTOCROWN
W/HYD. BED CLAMPING

10?? $20,400.00 $24,000.00 $32,000.00
12?? $22,100.00 $25,700.00 $34,800.00
14?? $25,200.00 $28,800.00 $40,400.00

FOR CROWNING FOR V DIE OPENINGS LARGER THAN 6 in CONTACT
FACTORY
NEW STANDARD PREMIUM, HEAVY DUTY HARDENED CROWNING SYSTEMS,
ALSO AVAILABLE


WILA RAM CLAMPING SYSTEMS

TOOLING FOR WILA QUICK-CHANGE RAM CLAMPING SYSTEMS QUOTED
REQUIRE: AMERICAN STYLE TOOLING SAFETY TANGS WITH ALL
PUNCHES

WILA HYDRAULIC QUICK-CHANGE, POWER RAM CLAMPING SYSTEMS

AMERICAN NEW STANDARD PRO

10?? $16,200.00 $16,500.00
12?? $17,400.00 $17,900.00
14?? $19,200.00 $19,500.00
NEW STANDARD PREMIUM, HEAVY DUTY HARDENED CLAMPING SYSTEMS,
ALSO AVAILABLE

CONTACT FACTORY FOR QUOTES ON ALL OTHER WILA PRODUCTS

REMOVABLE AND NON-REMOVABLE BED AND RAM WIDTH EXTENSIONS

MACHINING REQUIRED FOR REMOVABLE FLANGES FOR UP TO 12??
MACHINES
($1,600.00 EACH FOR BED OR RAM)
$3,200.00

REMOVABLE 5 inchX 5 inch ANGLE FLANGES-- MUST INCLUDE ABOVE
MACHINING

10 inch TOTAL ADDITIONAL WIDTH X 10?? LONG BETWEEN END HOUSINGS
ONLY.
FOR FLANGES LONGER THAN 10?? CONTACT FACTORY
($6,100.00 EACH FOR BED OR RAM)
$12,200.00

NON-REMOVABLE PERMANENT BED AND RAM FLANGES
PRICE BELOW FOR 12?? OVERALL AND SHORTER BRAKES (CONTACT
FACTORY FOR LONGER BRAKES)
11 ?? inch WIDE X 10?? BED AND RAM FLANGES
$6,400.00
(BETWEEN HOUSINGS ONLY)
14 inch WIDE X 10?? BED AND RAM FLANGES
(BETWEEN HOUSINGS ONLY) $7,400.00
18 inch WIDE X 10?? BED AND RAM FLANGES $10,600.00
(BETWEEN HOUSINGS ONLY)
OTHER SIZE NON-REMOVABLE FLANGES ARE AVAILABLE UPON REQUEST

HIGH SPEED SYSTEMS
HORSEPOWER WILL INCREASE WITH HI-SPEED SYSTEMS

TONNAGE STANDARD SYSTEM HI-SPEED SYSTEM
PRICE
APP PRESS RET APP PRESS
RET

100/150 200 24 260
$7,900.00
200 107 20 139 183 20 236
$7,100.00
250 102 16 132 150 16 195
$7,100.00
325 90 18 116 159 18 127
$7.100.00
400 110 17 106 173 17 130
$7,600.00

FOR OTHER HIGH SPEED SYSTEMS CONTACT FACTORY


EXTRA OPEN HEIGHT, EXTRA THROAT DEPTH, EXTRA STROKE
TONNAGE 12 inch HORN 2 inch EXTRA 4 inch EXTRA 2 inch
EXTRA 2 inch EX. OPEN HT.
EXT. B & R THROAT THROAT STROKE
(PER EVERY 2 inch)
100 $3,900.00 $3,500.00 $4,500.00
**$5,900.00 $700.00
150 $4,100.00 $3,800.00 $4,800.00
**$5,900.00 $800.00
200 $4,500.00 $3,900.00 $4,900.00
$6,500.00 $900.00
250 $4,700.00 $4,200.00 $5,200.00
$6,500.00 $900.00
325 $5,000.00 $4,800.00 $7,000.00
$7,000.00 $1,100.00
400 $5,300.00 $5,400.00 $7,400.00
$7,000.00 $1,200.00

HORN EXTENSIONS PROVIDE 24 inch OF EXTRA BED AND RAM LENGTH.
LONGER EXTENSIONS ARE AVAILABLE UPON SPECIAL REQUEST.
TONNAGE IS LIMITED ON HORNS PAST THE END FRAMES TO 10% OF
OVERALL MACHINE TONNAGE.
CONSULT FACTORY FOR SPECIAL CHANGES NOT LISTED ABOVE. ALL
FRAME CHANGING OPTIONS WILL BE APPLIED TO NEW ORDER
MACHINES ONLY.
** NOTE: LONGER STROKE NOT AVAILABLE ON 6??, 8?? OR 10??
BRAKES
NOTE: WHEN ORDERING MORE THAN 6 inch OF EXTRA OPEN HEIGHT OR
THROAT DEPTH ON ANY TONNAGE CONSULT FACTORY FOR PRICE.
NOTE: WHEN ORDERING EXTRA STROKE, YOU DO NOT AUTOMATICALLY
GET EXTRA OPEN HEIGHT. WHEN ORDERING EXTRA OPEN HEIGHT,
YOU DO NOT AUTOMATICALLY GET EXTRA STROKE. BOTH EXTRA OPEN
HEIGHT AND EXTRA STROKE ARE SEPARATE OPTIONS.




START-UP / TRAINING / MAINTENANCE SERVICE

NOTE! ONSITE FACTORY TRAINING/START-UP IS NOT INCLUDED OR
REQUIRED WITH PURCHASE OF A NEW PRESS BRAKE. DUE TO THE
SIMPLICITY OF OUR MACHINERY FORMAL TRAINING IS RARELY
REQUIRED. ALL CNC SYSTEMS ALREADY INCLUDE ONSITE TRAINING
IN QUOTED PRICE.
PRIOR TO ARRIVAL OF OUR TECHNICIAN, THE MACHINE MUST BE
FULLY RIGGED IN PLACE, LEVEL, BOLTED DOWN, OIL IN RESERVOIR
AND HOOKED UP ELECTRICALLY

IF ONE DAY??S TRAINING/START-UP FOR THE MACHINE IS
REQUIRED ADD THE FOLLOWING CHARGE

PACIFIC/MOUNTAIN TIME ZONE:
$3,800.00 (NET)
CENTRAL TIME ZONE
$2,800.00 (NET)
EASTERN TIME ZONE
$3,400.00 (NET)

ADD $1,000.00 FOR EACH ADDITIONAL DAY REQUIRED.


DEPOSIT/ORDER ENTRY

A 25% NON-REFUNDABLE DEPOSIT IS REQUIRED AT THE POINT
OF ORDER ENTRY AND THE DELIVERY SCHEDULE WILL NOT BEGIN
UNTIL THE DEPOSIT IS RECEIVED AT STANDARD INDUSTRIAL.
CUSTOMER IS ALSO REQUIRED TO PAY FOR AND ACCEPT DELIVERY OF
MACHINE(S) AT PREVIOUSLY AGREED UPON MONTH OF COMPLETION.


VOLTAGE

IF THE MACHINE IS 50 H.P. OR MORE, THERE WILL BE A
CHARGE FOR 230, 208 OR 200 VOLTS. THE STANDARD VOLTAGE IS
230-3-60 UP TO 40 H. P. BUT CAN BE SUPPLIED UP TO 480-3-60
AT NO CHARGE. 50 H. P. MACHINES AND ABOVE ARE STANDARD
WITH 480-3-60. OTHER VOLTAGES, PHASES AND HERTZ ARE
AVAILABLE BUT ARE SUBJECT TO PRICE INCREASES.


RETRO-FIT NOTE:

ALL PRICES LISTED IN THESE OPTIONS PAGES ARE AVAILABLE WITH
THE PURCHASE OF A NEW PRESS BRAKE AT THE POINT OF ORDER
ENTRY. AFTER ORDERS HAVE BEEN PLACED, ANY ADDED OR CHANGED
OPTIONS WILL BE SUBJECT TO RETRO-FIT PRICES.
IF ORDERING OPTIONS FOR RETRO-FIT IN THE FIELD, MANY OF
THESE OPTIONS ARE SUBJECT TO CRATING CHARGES FOR SAFE
SHIPPING PURPOSES. LARGE ITEMS LIKE BACKGAUGES WILL HAVE
CRATING CHARGES AS WELL AS ADDITIONAL CHARGES TO EASE THE
RETRO-FITTING PROCESS.


NOTE: NO TOOLING, GAUGING OR OIL IS INCLUDED AS STANDARD
WITH THE PURCHASE OF A NEW PRESS BRAKE. TOOLING IS
AVAILABLE OPTIONALLY. CUSTOMER WILL NEED TO SUPPLY MOBIL
DTE24 OR EQUIVALENT HYDRAULIC OIL (CONTACT FACTORY FOR
AMOUNT).

Not Quite What You're Looking For?

Our knowledgeable staff will assist you with all of you questions.

Contact Us