SPECIFICATIONS:
Capacities
Swing over bed 18”
Swing over cross slide 9 1/2”
Workpiece Weights
At the headstock 350 lbs.
Between chuck and tailstock 1,500 lbs.
Between chuck and tailstock
w/steady rest 3,000 lbs.
Headstock
Spindle speeds (no.) range RPM (21) 20-2000 Hole through spindle 3”
Spindle nose D1-8 Camlock
Headstock Center #6 MT
Quick Change Gearbox
Threads per inch (no.) range (64) ¼ - 60
Metric threads (no.) range (64) .5 - 120
Module threads (no.) range (64) .125 - 30 Diametral Pitch (no.) range (64) 1 - 240
Longitudinal feeds (no.) range (124) .00145-.44474 Cross feeds (no.) range (56) .0007-.22237 Leadscrew (Dia) range (2”) 2 TPI
Feed rod diameter 1”
Carriage & Apron
Cross slide travel 12 1/2”
Compound rest travel 5 3/8”
Graduation of apron handwheel .020
Graduation of cross slide handwheel .002 (Dir read)
Tailstock
Travel of spindle barrel 9 ½”
Diameter of spindle barrel 3 ½”
Taper of center #5 MT
Two Speed 1:1, 4:1
Bed
Width of bed 15 ¾”
Depth of bed 16 7/8”
Hardness of bed (Rockwell C) 42-48
Taper Attachment
Degrees of taper +/- 10 Degrees
Maximum turning length per setting 15 ¾”
Motors
Main Drive 10 HP
Coolant pump ¼ HP
Steady and Follow Rest
Steady rest ½”-6 1/8”
Follow rest ½”- 7 7/8”
Shipping Data
Overall width 48”
Overall height 60”
Overall length 114”
Weight 6,200 lbs
Electrics
220/440/3/60
Standard Features:
Big 3” thru hole
Inch/metric threads w/single switch lever
Cuts most inch/metric threads without change gears Hardened & ground bedways
Forced lubrication to the headstock, carriage and bedways
Mechanical disc clutch
Precision (3) bearing spindle
Crossfeed and threading safety interlock
Feed reversing at the apron
4-way rapid traverse
Single lever control for feeds and rapids
Two Speed Tailstock
Included Accessories:
➢ Steady Rest
➢ Follow Rest
➢ Thread Dial
➢ Coolant System
➢ Taper Attachment
➢ 3 Jaw Chuck
➢ Carriage Stop
➢ Work Light
➢ Full Length Splash Guard
➢ Service Wrenches & Spanners
NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION
Options:
12” Steel Body 3-Jaw Precision Chuck
w/2 Piece Reversible Jaws in Lieu of
Standard Chuck $2,600
15 ¾” Semi-steel 4 Jaw Chuck $3,800
15 ¾” Steel Body 4 Jaw Chuck
w/2 Piece Reversible Jaws $4,500 Aloris Quick Change Tool Post
w/Holders (2#1, 2#2) $1,300
Newall 2 Axis Digital Readout Installed $3,500
Installation Assistance TBD
DELIVERY:SUBJECT TO STOCK
