1 - NEW SUNRISE HYDRAULIC DUAL-CYLINDER IRONWORKER, MODEL #: IW-110S

Brand
SUNRISE

Model
IW-110S

Stock #
85150

Condition
New

Year
N/A

Punch 110 tons
Punch Capacity 1.125" in 1" material or 2" in 9/16" material
Punch Capacity Throat 12 inches
Punch Capacity Stroke Length 4 inches
Punch Capacity Cycles 28/min
Punch Capacity Working Height 48" to top of die
Angle Shear Maximum Capacity 90° 6" x 6" x 1/2"
Angle Shear Maximum Capacity 45° 3" x 3" x 3/8"
Angle Shear Working Height 48 inches
Section Shear Round Bar Capacity 1.75" (blade includes 1/2", 3/4",1.25", 1.75" openings)
Section Shear Square Bar Capacity 1.75" (blade includes 3/4" and 1.75" openings)
Section Shear Channel Capacity 6" (channel blades optional)
Section Shear Working Height 52.5 inches
Plate Shear 24" x 5/8"
Plate Shear Maximum W x T 16" x 3/4"
Plate Shear Angle Mitering Capacity 4 inches
Plate Shear Working Height 37.5 inches
Notcher 2.5" width x 3.5" depth in 1/2" material
Notcher V-Notcher 4" x 4" in 1/2" material (V-notcher optional)
Notcher Working Height 37.5 inches
Motor 10 HP
Electrics 3/60/220 or 480
Overall Dimensions 83" L x 34" W x 72" H
Weight 6500 pounds

Equipped With

EQUIPPED WITH:
● Five fully integrated working stations
● Two cylinder operation with separate remote foot pedals, one for the punch and one for the shearing stations
● Simultaneous operation of both punch and shearing stations (controlled independently)
● Punch cylinder with 4" stroke length and adjustable limit switches
     ● Cylinder is machined flat to insure proper alignment
     ● Cylinder has high-density bronze bushings
     ● Cylinder is keyed
● Heavy-Duty adjustable punch stripper with visibility window
     ● Quick-change punch holder including all necessary punch sleeves to accommodate up to 2" round punch
● Machined punch gauging table with adjustable X-Y back stops, scales and roller bearings for easy positioning
● Dual-opening die holder with overhang for punching channel flanges
     ● All necessary die holders to accommodate up to 2" round hole
     ● Slug Bucket
     ● T-slot bolster for rapid adjustment of die holder and easy accessory mounting
● Angle shear with no material loss cut and four-edge stationary blades
     ● 45 degree miter cut of angles
● Section shear for 90 degree shearing of round and square bar up to machines capacity (channel blades available)
● Plate shear with special rake angle to keep shearing deformation to a minimum. Four edge lower blade and two ed ge upper blade
      ● Support table for plate shear with adjustable guides and scribe marks
      ● Adjustable plate shear hold down with opening for miter cutting of angles (Hydraulic hold down available)
● 40" electric touch-n-go back gauge adjustable to accommodate plate, angle shear and section shear
     ● Back gauge features a proximity sensor
● Notching station with rectangular blades for shearing flat bar or angles (Triangular notcher available)
     ● Machined notcher gauging table with adjustable X-Y stops and scales
     ● Notcher station guard with electrical safety interlock and flashing warning light
     ● Short-stroke switch for notcher eliminates need to adjust limit switches to shorten stroke
● Magnetic LED work light
● Jog or full-stroke functions
● 11 sets punches and dies, SUNRISE Type: 3/8",1/2",9/16",11/16",13/16",15/16",1",1-1/16",1-1/4",1-3/8",1-1/2"
● Hydraulic and electrical systems with high quality components
● Hydraulic system protected with suction strainer as well as spin-on return line filter
● Electrics for 3/60/220 or 480 volt operation. Low voltage at the controls.
● Emergency stop palm buttons on both ends of machine
● HD Start Up and Training Video, Tool kit, Manual, Electrical and Hydraulic Schematic
NOTES:
SPECIFICATIONS SUBJECT TO VERIFICATION
OPTIONAL FEATURES:
* 5.5" x 5.5" Triangular Notcher Set for Punch end. Includes Gauging Table: $3,250.00
* 1m X-axis flip stop gauge system with 5 manually adjusted flip-stops: $895.00
* 2m X-axis flip stop gauge system with 10 manually adjusted flip-stops: $1,495.00
* 3m X-axis flip stop gauge system with 15 manually adjusted flip-stops: $2,750.00
* Channel blades for 2" and 3" x 4.1# structural channel. *openings for both sizes in one blade: $1,250.00
* Channel blades for 3" x 4.1# and 4" 5.4# structural channel. *openings for both sizes in one blade.: $1,250.00
* Channel blades for 4" 5.4# and 5" x 6.7#structural channel. *openings for both sizes in one blade: $1,250.00
* Channel blades for 6" x 8.2 # structural channel: $1,250.00
* 20" x 1/2" Capacity Single Vee Press Brake. Oriented front to back on SD/LT/XT models, and left to right on S/T models: $3,250.00
* 2m Electric Back Gauge: $1,495.00
* 3.7m (144") Electric Back Gauge: $1,950.00
* Angle Leg-Up and Channel Web Stripper. Includes special narrow swing away stripper for easy access to punch (for changeover) using "castle" style punch nut and longer punch stem. Clear safety cover guard included. Max hole diameter - 1.125": $1,250.00
* Multi-Stop Gauging Table: $3,500.00
* Hydraulic Punch Stripper with 3 interchangeable inserts to accommodate various punch sizes up to 2". Must be factory installed: $4,500.00
* 2" - 4" Oversize Punch attachment including all necessary equipment less punches and dies. Does not include gauge table: $2,950.00
* 2" - 8" Oversize Punch attachment including all necessary equipment less punches and dies. Does not include gauge table: $5,750.00
* 4" - 8" Oversize Punch attachment including all necessary equipment less punches and dies. Does not include gauge table: $4,950.00
* Gauge table for use with oversize punching attachment. Must be ordered from the factory: $850.00
* Urethane Stripper with 3 interchangeable inserts to accommodate various punch sizes up to 2": $950.00
* 4" x 4" Triangular Notcher Set for Notcher End - Includes Gauging Table: $1,750.00
* Multi Opening Press Brake Attachment indexed Left to Right - 27.5" x 3/16" (For thinner sheet metal): $2,950.00
* Single-Vee Press Brake Attachment indexed Front to Back for thicker plates - 10 x 3/4" capacity: $1,950.00
* Complete adapter kit for Figure 20/26 Punches and Figure 59/62 dies. Includes die bushings, punch sleeves and thread. NOTE: Uses larger die block opening. Available for all sizes: $499.00
DELIVERY:
SUBJECT TO STOCK

Not Quite What You're Looking For?

Our knowledgeable staff will assist you with all of you questions.

Contact Us