Stock #



Equipped With

Punching Pressure - 66 Ton
Punch Capacity - 7/8" x 3/4" (Diameter x Thickness - 1.5" x 7/16")
Throat Depth - 7 7/8"
Maximum Stroke Length - 1.5"
Cycles - 34/Min.
Working Height - 41" to top of die
Angle Shearing:
Maximum capacity 90° - 4" x 4" x 5/16"
Working Height - 42"
Section Shear:
Round bar capacity - 1-1/2"
Square bar capacity - 1-1/2"
Channel capacity - 4" (channel blades optional)
Working Height - 41"
Maximum W x T - 14" x 9/16"
Working Height - 32"
Press Brake:
Integrated Multi-Vee Press Brake 12" Capacity - Includes Gauge System
Motor - 7.5 HP
Electrics - 3/60/220 or 480
Weight - 3,150 lbs
Dimensions - 60" L x 30" W x 64" H
     SUNRISE K-Series Ironworkers range in capacities from 50 to 95 Tons and feature a vertical cylinder design. The K-series ironworkers are built with the SUNRISE tradition of well-engineered products for high power, quality, and reliability at an incredible price.
     The low-pressure setting for tool change and spotting provides maximum operator safety. The quick, fully adjustable cylinder stroke and optional deep throat enable mounting a wide range of special equipment such as press brakes, vee-notchers, custom tooling, and more.
     The large punching base with the “T-slots” provides a solid base for securing the punch tooling, as well as a wide range of optional and custom-designed tooling.
     SUNRISE ironworkers offer the lowest cost of ownership among leading ironworker brands due to the bronze bushings and gibings, multi-sided blades, and the highest quality components as well a standard three-year parts warranty.
Equipped With:
* Three fully integrated working stations
* Single cylinder operation with remote foot pedal for the punch and shearing stations
* Compact strong design featuring vertical movement of slide provides optimum results for all stations
* Fast cylinder stroke for increased efficiency
* Heavy-Duty adjustable punch stripper with visibility window
     * Keyed quick-change punch holder
     * Slug bucket
* Die holder with single opening for punching up to 1-1/2" diameter
     * T-slot bolster for rapid adjustment of die holder and easy accessory mounting
* Machined punch gauging table with removable front section, adjustable X-Y back stops and recessed scales.
* Hydraulic hold down for integrated angle, section, and plate shearing stations
* Angle shear with no material loss cut.
* Section shear with multiple openings for 90 degree shearing of round and square bar up to machines capacity
* Plate shear with special rake angle to keep shearing deformation to a minimum. Four useable-edge lower blade two useable-edge upper blade
     * Support table for plate shear with adjustable guides and scribe marks
* 40" electric touch-and-go back gauge adjustable to accommodate plate and angle shear
* Integrated 12" Multi-Vee Press Brake (Optional 8" single vee available).
     * Gauge Table
     * Additional Foot Pedal
     * Interlock safety guard
* Jog or full-stroke functions
* 11 sets punches and dies, SUNRISE Type: 3/8",1/2",9/16",11/16",13/16" 15/16",1",1-1/16",1-1/4",1-3/8",1-1/2"
* Hydraulic and electrical systems with high quality components
* Hydraulic system protected with suction strainer and spin on return line filter.
* Electrics for 3/60/220 or 480 volt operation. Low voltage at the controls.
* Emergency stop palm buttons on both ends of machine
* Tool kit, and instruction manual
Specifications Subject to Verification
Subject to Stock

Not Quite What You're Looking For?

Our knowledgeable staff will assist you with all of you questions.

Contact Us