1 - NEW U.S. INDUSTRIAL 22 TON X 4' HYDRAULIC PRESS BRAKE WITH SIMPLE CNC, MODEL #: USHB22-4SCNC

Model
USHB22-4SCNC

Stock #
85434

Condition
New

Year
N/A

Working Pressure 22 tons
Distance Between Housings 40.1 inches
Stroke Adjustment of Ram 2.75 inches
Open Height 9.64 inches
Rapid Ram Retreat Speed (per second) 2.0 inches
Pressing Speed Dependent on Tool Load
Hydraulic Oil Capacity 21 Gal.
Length 73 inches
Width 56 inches
Height 77 inches
Length of Working Table 51.9 inches
Throat Depth 7.8 inches
Ram Travel 3.14 inches
Rapid Ram Travel Speed (per second) 2.4 inches
Backgauge Travel 24 inches
Motor Horsepower 7.5 HP, 220 or 440 Volts, 3 ph.
Net Weight 4400 pounds

Equipped With

EQUIPPED WITH:
• Ram Deflection Adjustment
• Setting for ram speed slowdown and rapid return position
• Massive Torsion Bar for Parallelism
• Forged Heavy Duty Cylinder and Cylinder Body
• Three Speed Ram
• Rapid Approach, Bending Cycle and Rapid Retreat
• Bottom Time Delay
• All Steel Construction
• Inching, Single Cycle and Auto Run
• Bed tools are held with standard slot for ½” x 5/8” tang w/set screws, plus die clamps are included
• Ram takes standard American Tang Tooling (1/2” x 5/8”) and American Safety Tang Tooling, and Z1
• Space between Ram Tool Clamps allows for deep box bending
• Free Gooseneck Punch and multi-opening Die for up to 90° forming up to 10-gauge mild steel.
(• Special Note: The Gooseneck Punch and multi-opening Die included are general purpose tools to be used for training. Precision tooling should be purchased to meet your specific needs. The punch is segmented and it is up to the customer to calibrate these if they want to use them for a particular purpose. * There is no warranty on this tooling.)
OPTIONAL FEATURES:
• 2-Axis Simple CNC Back Gauge and Ram Control: (Controls BOTH Bend Angle and Backgauge Position. Comes with 6” LCD touch screen. Code programming only.): $2,995.00
• Sick deTec 2 Light Curtain: $2,990.00
• Upgrade to Graphic CNC and Sick deTec 4 Light Curtain: $4,000.00
• Upgrade to Graphic CNC and Fiessler Akas II Laser Guarding: $9,000.00
• Upgrade to Cam-Lever Quick Action Ram Clamps: $1,995.00
• Training in our Facility: No Charge
• Training at customer site, less than 300 miles from our facility: $2,995.00
• Training at customer site, more than 300 miles from our facility: $3,995.00

Not Quite What You're Looking For?

Our knowledgeable staff will assist you with all of you questions.

Contact Us