1 - PREOWNED SIMCO FANCOT MACHINING TURNING CENTER,
MODEL #: SL320-01 DC, S/N: 205

Brand
SIMCO

Model
SL 320-01 DC

Stock #
79742

Condition
Used

Year
N/A

Equipped With

SPECIFICATIONS: WORKING AREA:
MAX. SWING DIAMETER OVER THE BED ----------- 17.7 in
MAX. TURNING DIAMETER BETWEEN CENTERS ------ 6.3 in
CENTER HEIGHT OVER THE GUIDEWAY OF THE BED - 9.85 in
MAIN SPINDLE ALIGNMENT HEIGHT FROM THE
LOWER PLANE OF THE MACHINE ----------------- 37.4 in

HEADSTOCK:

MAIN SPINDLE NOSE FROM A (MSZ 5038/3),ACC.
TO DIN 550263
INNER TAPER OF THE MAIN SPINDLE ----------- MORSE 6
THROUGH HOLE OF THE MAIN SPINDLE DIA. ----- 2.2 in
THROUGH HOLE OF DRAW TUBE ----------------- 1.25 in
FRONT BEARING HOLE DIA. ------------------- 3.54 in
SPEED RANGE (TWO AUTOMATICALLY PRESELECTED
INTERVALS) -------------------------------- 50.....4000
R.P.M.
MAIN DRIVE MOTOR -------------------------- 23 HP
MAX. TORQUE OF THE MAIN SPINDLE ----------- 220 FT. LBF

SLIDE SYSTEM:

CARRIAGE TRAVEL --------------------------- 23.6 in
CROSS SLIDE TRAVEL ------------------------ 6.8 in
RAPID TRAVERSE (Z) ------------------------ 400 IPM
(X) ------------------------ 300 IPM

TAILSTOCK:

QUILL DIAMETER ---------------------------- 3.54 in (90 MM)
QUILL STROKE ------------------------------ 5.9 in (150 MM)
QUILL TAPER ------------------------------- MT 4

TURRET:

NUMBER OF TURRET STATIONS ----------------- 10
VDI TURRET DISK
OD TURNING TOOL SIZE ---------------------- 3/4 in SQUARE

MACHINE DIMENSIONS:
WIDTH ------------------------------------- 124 in
LENGTH ------------------------------------ 65 in
HEIGHT ------------------------------------ 69 in
WEIGHT (APPROX.) -------------------------- 7,716 LBS.

ELECTRICAL:

VOLTAGE ---------------------------------- 480
3 PH
60 HZ

POWER CONSUMPTION ------------------------ 30 KVA (23A)


CONTROL:

FANUC 0T-A CONTROL

CONTROLLABLE AXES:
SIMULTANEOUS CONTROLLABLE AXES ---------- 2 AXES (X AND Z)

INPUT COMMAND:
MINIMUM INPUT --------------------------- 0.0001 in
X-AXIS IN DIA.
ABSOLUTE/INCREMENTAL COMMAND ------------ XZ AND UW
DECIMAL POINT INPUT --------------------- VALUES CAN BE
INPUT
USING DECIMAL
POINT
INCH/METIC CONVERSION ------------------- G20, G21

INTERPOLATION:
POSTIONING ------------------------------ G00
LINEAR INTERPOLATION -------------------- G01
CIRCULAR INTERPOLATION ------------------ GO2, G03

FEED:
DWELL ----------------------------------- G04
FEED PER MINUTE/FEED PER REVOLUTION ----- G98,G99
MANUAL HANDLE FEED ---------------------- 0.0001 in /0.001 in
RAPID TRAVERSE OVERRIDE ----------------- F0,25,50,100%
CUTTING FEED OVERRIDE ------------------- 0-150% PER 10%

PROGRAM STORAGE EDITING:
PROGRAM STORAGE CAPACITY ---------------- 40M
NUMBER OF STORED PROGRAMS --------------- 63
PROGRAM EDITING -------------------------
DELECTION,INSERTION,ALTERATION
PROGRAM NUMBER SEARCH ------------------- 0 NUMBER SEARCH
SEQUENCE NUMBER SEARCH ------------------ N NUMBER SEARCH
BACKGROUND EDITING ---------------------- EDITING DURING
AUTOMATIC
OPERATION

OPERATION DISPLAY:
CONTROL PANEL --------------------------- 9 in CRT WITH
FUNCTION KEYS
DISPLAY LANGUAGE ------------------------ ENGLISH
RUNNING TIME DISPLAY -------------------- RUNING TIME
UNDER
AUTOMATIC
OPERATION

I/O FUNCTION ----------------------------- RS-232C

S.T.M. FUNCTION:
SPINDLE FUNCTION ------------------------ S4 DIGITS
CONSTANT SURFACE SPEED CONTROL ---------- G96,G97
TOOL FUNCTION --------------------------- T 4 DIGITS
M FUNCTION ------------------------------ M2 DIGITS

TOOL COMPENSATION:
TOOL NOSE R COMPENSATION ---------------- G40,G41,G42
NUMBER OF TOOL OFFSETS ------------------ 16 SETS

COORDINATE SYSTEM:
AUTOMATIC REFERENCE POINT RETURN -------- G28
COORDIANTE SYSTEM SETTING --------------- G50

OPERATION SUPPORT FUNCTIONS:
AUXILIARY FUNCTION SWITCH --------------- SINGLE BLOCK
OPTIONAL STOP
BLOCK DELETE
PROGRAM TEST
AXIS INHIBIT

PROGRAM SUPPORT FUNCTIONS:
CIRCLAR RADIS R DESIGNATION ------------- R,R-
DESIGNATION
CHAMFERING CORNER R --------------------- CHAMFER & CORNER
ROUNDNESS CAN BE
MACHINED
MULTIPLE REPETITIVE CYCLE --------------- G70,G71,G72,G73,
G74,G75,G76 EQUIPPED WITH: CHIP CONVEYOR
1/2 HP MOTOR

COOLANT TANK
1/3 HP MOTOR COOLANT TANK CAPACITY 40 GAL.

HYDRAULIC UNIT
1.5 HP MOTOR
HYDRAULIC TANK CAPACITY 20 GAL.

HARDINGE COLLET NOSE --- 16C * SPECIFICATIONS SUBJECT TO VERIFICATIONS * DELIVERY: IMMEDIATE - SUBJECT TO PRIOR SALE

Not Quite What You're Looking For?

Our knowledgeable staff will assist you with all of you questions.

Contact Us